Clarion NX603 Quick Start Manual & Installation Manual page 173

92 NX603 English
Maps may contain information about the speed limits of the road segments.
Clarion Mobile Map is able to warn you if you exceed the current limit. This
information may not be available for your region (ask your local dealer), or may not
be fully correct for all roads in the map.
The maximum speed set in the vehicle profile is also used for this warning. Clarion
Mobile Map alerts you if you exceed the preset value even if the legal speed limit
is higher.
This setting lets you decide whether you wish to receive visible and/or audible
warnings.
Adjust the slider to set the relative speed above which the application initiates the
warning.
The following alert types are available:
Audio warning: you receive a verbal warning when you exceed the speed
limit with the given percentage.
Visual warning: the current speed limit is shown on the map when you
exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it is
shown only if your speed exceeds it), you can set it here.
This feature allows you to receive a warning when approaching a Road Safety
Camera or other alert points like school zones or railroad crossings. You must
ensure on your own liability that using this feature is legal in the country where you
intend to use it.
You can set the alert for the different alert point categories individually. The
following alert types are available:
Audio warning: beeps can be played (natural voice) or the type of the alert
can be announced (TTS) while you are approaching one of these points,
and an extra alert can warn you if you exceed the given speed limit while
approaching.
Visual warning: the type of the alert point, its distance and the related speed
limit appear on the Map screen while you are approaching one of these
cameras.
For some of the alert points, the enforced or expected speed limit is available. For
these points, the audio alert can be different if you are below or above the given
speed limit.
Only when speeding: The audio alert is only played when you exceed the
given speed limit.
When approaching: The audio alert is always played when approaching one
of these alert points. In order to draw your attention, the alert is different
when you exceed the speed limit.
Maps may contain driver alert information. Tap this button to turn on or off these
warnings and to set the distance from the hazard to receive the warning at. These
can be set individually for the different warning types.