Clarion NX603 Quick Start Manual & Installation Manual page 176

Vehicle types:
When creating a new vehicle profile, select one of the below vehicle types. Besides the below mentioned
conditions, dimension, weight and freight hazard restrictions can also be taken into account when
planning a route.
Maneuver restrictions and directional constraints are taken into account when planning a
route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only they are inevitable to reach the
destination.
Walkways are excluded from routes.
Select the engine and fuel type of your vehicle. This helps in estimating the CO
emission.
Enter the average fuel price for travel cost calculation. The currency can be set in
Regional Settings.
Set the maximum speed you travel with the vehicle.
Check this box to enable more settings for the below parameters.
Set the total length of the vehicle.
Set the width of the vehicle.
Set the height of the vehicle.
Set if there is a trailer attached to the vehicle.
Set the maximum allowed weight of the vehicle.
Set the actual weight of the vehicle.
Select one or more hazard types if the vehicle carries dangerous material.
:
:
2
NX603 English 95