Clarion NX603 Quick Start Manual & Installation Manual page 179

Button
98 NX603 English
Switch the map view between a 3D perspective view and a 2D top-down view.
Adjust the basic zoom and tilt levels to your needs. Three levels are available.
Switch between daytime and night color modes or let the software switch between
the two modes automatically a few minutes before sunrise and a few minutes after
sunset.
Select the color scheme used in daytime mode.
Select the color scheme used in night mode.
Replace the default position marker to one of the 3D vehicle models. You can
select separate icons for different vehicle types selected for route planning.
Separate icons can be used for car, pedestrian and the other vehicles.
Show or suppress 3D landmarks, 3D artistic or block representations of prominent
or well-known objects.
Show or suppress 3D city models, 3D artistic or block representation of full city
building data containing actual building size and position on the map.
Show or suppress the 3D elevation of the surrounding terrain.
Turn on or off track log saving, that is, saving the sequence of the locations your
journeys go through.
Select which Places to show on the map while navigating. Too many Places make
the map crowded so it is a good idea to keep as few of them on the map as
possible. For this, you have the possibility to save different Place visibility sets.
You have the following possibilities:
Tap the checkbox to show or hide the Place category.
Tap the name of the Place category to open the list of its subcategories.
Tap
previously saved one. Here you can also revert to the default visibility
settings.
Description
to save the current Place visibility set or to load a