User Set Mode; Scrambler Function; Stun Function - Icom IC-F3162DT Instruction Manual

■ User Set mode

The User Set mode allows you to set seldom-changed set-
tings. If the transceiver has [User Set Mode] assigned to it,
you can "customize" the transceiver operation to suit your
preferences and operating style.
Entering the User Set mode:
Hold down [User Set Mode] for 1 second to enter the User
q
Set mode.
Push [User Set Mode] several times to select the appro-
w
priate item. Then push [CH Up] or [CH Down] to set the
desired level or condition.
• Available User Set mode items are Backlight, LCD contrast,
Beep, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, VOX Gain*, VOX Delay*, Battery Voltage, Signal
Moni, Lone Worker and System Info.
* Appears only when the external VOX unit is connected.
Hold down [User Set Mode] for 1 second again to exit the
e
User Set mode.

■ Scrambler function

The Voice Scrambler function provides private communication
between stations. All versions have a built-in frequency inver-
sion type scrambler. Moreover, an optional Rolling or Non-
rolling type can be used.
➥ Push [Scrambler] to turn the Voice Scrambler function ON
or OFF.
• " " appears when the function is ON.

■ Stun function

The dispatcher can send a signal that will stun, kill or revive
your transceiver.
When a Stun command is received, the transceiver becomes
unusable. In that case, receiving a Revive command or input-
ting the password* (p. 11) is necessary to operate the trans-
ceiver again.
When a Kill command is received, the transceiver becomes
unusable (the transceiver switches to the cloning required
condition). In that case, cloning the transceiver is necessary
to operate the transceiver again.
* Depending on the pre-programmed settings.
See the operating guide for details of the Stun function with
the BIIS and dPMR system operations. Ask your dealer for
details.
3
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
16