Table of Contents
Advertisement
2
BASIC OPERATION
■ User Set mode
The User Set mode allows you to set seldom-changed set-
tings, and you can "customize" the transceiver operation to
suit your preferences and operating style.
Entering the User Set mode:
q Hold down [SET] for 1 second to enter the User Set
mode.
w Push [SET] several times to select the appropriate item.
Then push [CH Up] or [CH Down] to set the desired level or
option.
• In the User set mode, the selectable items are preset by your
dealer. The presetable Set mode items are Backlight, Beep
ON/OFF, Beep Level, Ringer Level, SQL Level, AF Min Level,
Mic Gain, Battery Voltage, Horn, Signal Moni, Lone Worker
and System Info.
e Hold down [SET] for 1 second again to exit the User Set
mode.
■ Encryption function
The encryption function provides private communication be-
tween stations while operating in the digital mode.
q Push [Encryption] to turn ON the encryption function.
• "
" (Encryption icon) appears.
w Push [Encryption] again to turn OFF the encryption func-
tion.
• "
" disappears.
12
■ Stun function
The dispatcher can send a 2/5-tone signal that will stun, kill
or revive your transceiver.
When the Stun ID is received, a beep sounds*, and the trans-
ceiver becomes unusable. Receiving a Revive command or
entering password* (p. 8) is necessary to operate the trans-
ceiver again in this case.
When the Kill ID is received, a beep sounds*, and the trans-
ceiver becomes unusable (the transceiver switches to the
cloning required condition). Cloning the transceiver is neces-
sary to operate the transceiver again in this case.
* Depending on the preprogramming. Ask your dealer for de-
tails.
See the operating guide for details of the Stun function
with the MDC and Digital system operations. Ask your
dealer for details.
Advertisement
Table of Contents
