Protecting Files - JVC LYT1094-001A Instructions Manual

Protecting Files

The Protect mode helps prevent the accidental
erasure of files.
VIDEO/MEMORY Switch
SHUTTLE SEARCH Ring (3/5)
MENU Button
SET/SELECT Button
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to "MEMORY".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
Open the LCD monitor fully, or pull out the
viewfinder fully.
The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5
Press SET/SELECT. The MEMORY SELECT screen
appears.
6
Press + or – to select the desired type of file, and
press SET/SELECT.
7
Press MENU. The Menu Screen appears.
8
Press + or – to select
"PROTECT", and press
SET/SELECT. The Sub
Menu appears.
Power Switch
Lock Button
+, – Button
pg. 16)
MENU
PROTECT
DELETE
DPOF
NO . RESET
FORMAT
D I SPLAY
END
To protect the currently displayed file
9
Press + or – to select
"CURRENT", and press
SET/SELECT. The
PROTECT screen appears.
10
Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
11
Press + or – to select
"EXECUTE", and press
SET/SELECT.
To cancel protection,
select "RETURN".
Repeat steps 10 and 11
for all files you want to
protect.
To protect all files stored in the memory
card
9
Press + or – to select "PROT.ALL", and press SET/
SELECT. The PROTECT screen appears.
10
Press + or – to select "EXECUTE", and press
SET/SELECT.
To cancel protection, select "RETURN".
NOTES:
If the " " mark appears, the currently displayed
file is protected.
When the memory card is initialised or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
To Remove Protection
Before doing the following, perform steps 1 – 8 in
"Protecting Files" in the left column.
To remove protection from the currently
displayed file
9
Press + or – to select "CURRENT", and press SET/
SELECT. The PROTECT screen appears.
10
Turn the SHUTTLE SEARCH Ring to the left
(3) or to the right (5) to select the desired
file.
11
Press + or – to select "EXECUTE", and press
SET/SELECT.
To cancel selection, select "RETURN".
Repeat steps 10 and 11 for all files you want to
remove protection.
CONTINUED ON NEXT PAGE
27
EN
M E NU
PROTECT CUR RENT
PROT . AL L
CANC . AL L
RETURN
P ROTECT
PROTECTED
RETURN