Video Playback; Normal Playback; Still Playback - JVC LYT1094-001A Instructions Manual

20
EN

Normal Playback

VOL. +/– Button
VIDEO/MEMORY Switch
Speaker
Stop Button (8)
1
Load a cassette. (
2
Set the VIDEO/MEMORY Switch to "VIDEO".
3
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
4
To start playback, press 4/9.
5
To stop playback, press 8.
During Stop mode, turn the SHUTTLE SEARCH
Ring to the left (3) to rewind, or to the right
(5) to fast-forward the tape.
NOTES:
Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details, pg. 72.
If Stop mode continues for 5 minutes when power
is supplied from a battery, the camcorder shuts off
automatically. To turn on again, set the Power
Switch to "OFF", then to "P".
The playback picture can be viewed in the LCD
monitor, viewfinder or on a connected TV.
( pg. 22)
You can also view the playback picture on the
LCD monitor with it flipped over and pushed
against the camcorder body.
Play/Pause Button
(4/9)
Power Switch
Lock Button
SHUTTLE SEARCH Ring
(3/5)
MENU Button
SET/SELECT
Button
pg. 15)
LCD monitor/viewfinder indications:
• When power is supplied from a battery: the
" " battery indicator is displayed. (
• When power is supplied from an AC outlet: the
" " battery indicator does not appear.
When the S/AV/Editing cable is connected to the
S/AV connector, the sound is not heard from the
speaker.
To control the speaker volume...
Press VOL. + to turn up the volume, or VOL. – to
turn down the volume.

Still Playback

Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 again.
If still playback continues for more than about
3 minutes, the camcorder's Stop mode is
automatically engaged.
When 4/9 is pressed, the image may not
pause immediately while the camcorder
stabilises the still image.

VIDEO PLAYBACK

pg. 80)