Program Ae With Special Effects - JVC LYT1094-001A Instructions Manual

WIPE – DOOR: Wipe in as the two halves of a
black screen open to the left and right, revealing the
scene, or wipe out and the black screen reappears
from left and right to cover the scene.
WIPE – SCROLL: The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
WIPE – SHUTTER: Wipe in from the centre of
a black screen toward the top and bottom, or wipe
out from the top and bottom toward the centre
leaving a black screen.

Program AE With Special Effects

IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
( pg. 32) If an unusable mode is selected, the
indicator of Wipe/Fader effects blinks or goes out.
1
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
2
Open the LCD monitor fully, or pull out the
viewfinder fully.
3
Set "r" to the desired mode. (
The selected effect indicator appears.
To deactivate the selected effect...
Select "OFF" in step 3.
NOTES:
Program AE with special effects can be changed
during recording or during Record-Standby.
Some modes of Program AE with special effects
cannot be used during Night-Scope.
PROGRAM AE
OFF: Deactivates Program AE with special effects.
NIGHTSCOPE
Night-Scope (NIGHTSCOPE)
Makes dark subjects or areas even brighter than they
would be under good natural lighting. The recorded
image may look as if it is strobing due to the slow
shutter speed.
The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
" " appears beside "
is being automatically adjusted.
NOTES:
During Night-Scope, the following functions or
settings cannot be activated and its indicator
blinks or goes out:
• Some modes of "Program AE With Special
Effects".
• "GAIN UP" in CAMERA Menu. (
• "DIS" in MANUAL Menu. (
pg. 31)
(Factory-preset: OFF)
" while the shutter speed
pg. 35)
pg. 36)
During Night-Scope, it may be difficult to bring
the camcorder into focus. To prevent this, use of a
tripod is recommended.
SHUTTER 1/50: The shutter speed is fixed at 1/
50th of a second. Black bands that usually appear
when shooting a TV screen become narrower.
SHUTTER 1/120: The shutter speed is fixed at
1/120th of a second. The flickering that occurs when
shooting under a fluorescent light or mercury-
vapour lamp is reduced.
SPORTS
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable slow-
motion playback. The faster the shutter speed, the
darker the picture becomes. Use the shutter function
under good lighting conditions.
SNOW: Compensates for subjects that may
otherwise appear too dark when shooting in
extremely bright surroundings such as in the snow.
SPOTLIGHT: Compensates for subjects that
may otherwise appear too bright when shooting
under extremely strong direct lighting such as
spotlights.
NOTE:
"SPOTLIGHT" has the same effect as –3 with the
exposure control. ( pg. 44)
TWILIGHT: Makes evening scenes look more
natural. White Balance (
automatically set to "
your desired setting. When Twilight is chosen, the
camcorder automatically adjusts the focus from
approx. 10 m to infinity. From less than 10 m, adjust
the focus manually. The flash does not fire in this
mode.
CONTINUED ON NEXT PAGE
33
EN
pg. 34, 45) is
", but can be changed to