Make Connections - JVC LYT1094-001A Instructions Manual

Make Connections

Also refer to page 22.
Connector
Cover****
To S-VIDEO IN*
Editing
Extension cable
(provided)***
"Y/C"/"CVBS"
Video Out Select
Switch
ABTo Remote
PAUSE or
R.A.EDIT
CTo PAUSE
IN
DISPLAY
* Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
** If your VCR has a SCART connector, use the
provided cable adapter.
*** If necessary, use this cable for connections.
****When connecting the cable, open the cover.
NOTE:
Set the video out select switch of the cable adapter
as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
To S/AV connector
S/AV/Editing cable
(provided)
To AUDIO IN,
VIDEO IN
Cable Adapter**
VCR
TV
1
A A JVC VCR equipped with a Remote PAUSE
connector...
...Connect the editing cable to the Remote
PAUSE connector.
B A JVC VCR not equipped with a Remote
PAUSE connector but equipped with an
R.A.EDIT connector...
...Connect the editing cable to the R.A.EDIT
connector.
C A VCR other than above...
...Connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder.
3
Set the VIDEO/MEMORY Switch to "VIDEO".
4
Set the Power Switch to "P" while pressing
down the Lock Button located on the switch.
5
Turn the VCR power on, insert a recordable tape
and engage the AUX mode.
Refer to the VCR's instructions.
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If
they do, they will be recorded onto the new tape.
To choose whether or not the following displays
appear on the connected TV...
• Date/time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
( pg. 31, 41) Or, press DISPLAY on the remote
control to turn on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
( pg. 31, 41)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/
TV". ( pg. 31, 41)
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be
connected instead of the S/AV/Editing cable.
However, it is necessary to connect the editing
cable of the S/AV/Editing cable to the VCR. (For
details, see step 1.)
CONTINUED ON NEXT PAGE
59
EN