PLAYBACK MENUS (cont.)
Display Menu
VIDEO DISPLAY
The parameters (except "OFF" in ON SCREEN
settings) are the same as in the description on
page 38.
ON SCREEN
OFF / LCD / LCD/TV
When set to "OFF", the camcorder's display
disappears.
DATE/TIME
OFF / AUTO / ON
When set to "AUTO", the date/time are displayed
in the following cases:
• When playback starts. The camcorder displays
the date/time when scenes are recorded.
• When the date is changed during playback.
TIME CODE
OFF / ON
NOTE:
The date indication can also be turned on/off by
pressing the DISPLAY Button on the remote control
(provided). (
pg. 22, 50, 59)
Display
12b i t / SOUND1
L
5 2
. 2
1
0 .
1 : 0 3
7
12 : 34 : 24
(Factory-preset: LCD)
(Factory-preset: OFF)
(Factory-preset: OFF)
ON SCREEN Setting:
4
For playback sound, tape
speed and tape running
during video playback.
DATE/TIME Setting:
For date/time.
3
TIME CODE Setting:
For time code.
Minutes
Seconds
Frames*
* 25 frames = 1 second
FEATURES FOR RECORDING
Snapshot (For Video Recording)
MENU Button
SET/SELECT
Button
SNAPSHOT Button
This feature lets you record still images that look like
photographs onto a tape.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
2
Set the Power Switch to "M" while pressing down
the Lock Button located on the switch.
3
Open the LCD monitor fully, or pull out the
viewfinder fully.
4
Set "SNAP MODE" to the desired mode.
(
pg. 31, 35)
5
Press SNAPSHOT.
The "O" indication appears and a still
image will be recorded for approx. 6 seconds,
then the camcorder re-enters the Record-
Standby mode.
You can perform Snapshot also during
recording. A still image will be recorded for
approx. 6 seconds, then the normal recording
resumes.
Regardless of the Power Switch position ("A"
or "M"), Snapshot recording takes place using
the selected Snapshot mode.
NOTES:
To remove the shutter sound, refer to "BEEP" on
page 37.
If Snapshot recording is not possible, the "O"
indication blinks when SNAPSHOT is pressed.
CONTINUED ON NEXT PAGE
41
EN
+, – Button
VIDEO/MEMORY
Switch
Power Switch
Lock Button