REMOVING THE IMPELLER AND BASKET
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Raise the top on the hinges. See the
section: "REMOVING THE TOP".
4. Remove harness from control and water
valves to set the top aside.
Figure 1
Release Cover
with a Flat Blade
Screwdriver
4-18
5. Remove tub ring.
6.
Remove impeller bolt cover,
see figure 1.
7. Remove impeller bolt.
8. Remove impeller.
9. Remove impeller.