Bluetooth Features
Leash Alarm
When enabled, the Leash Alarm will force the imager to sound an alarm
for a preprogrammed length of time to notify if an imager is leaving the
immediate vicinity of the Base Station. This is especially useful in
instances where the imager might inadvertently have been placed in a
bag or cart.
For this mode to be effective,
imager is asleep, there is no way for it to know where it is relative to the
Base Station because communication is not active between the devices.
START
DURATION
Disable Alarm
1 Second
2 Seconds
3 Seconds
4 Seconds
5 Seconds
6 Seconds
7 Seconds
8 Seconds
7-4
Deep Sleep Mode
BARCODE
QuickScan
must be disabled. If the
®
QS6500/QS6500BT