Code I.d. Selection; Example: Setting The Msi/Plessey Code I.d - PSC QuickScan QS6500 Reference Manual

Symbologies
MSI/Plessey — continued

Code I.D. Selection

The Code I.D. for this symbology consists of one or two user-selectable
ASCII characters. It can be appended previous to or following the trans-
mitted MSI/Plessey bar code data depending on how this feature is
enabled.

Example: Setting the MSI/Plessey Code I.D.

To configure this feature:
1. Determine which character(s) you would like to use to represent
the MSI/Plessey symbology. Reference
sion Chart
character(s). In this example we'll set a Code I.D. of "@" to repre-
sent MSI/Plessey. The value from the table corresponding to ''@' is
40. This value will be used in a step to follow.
2. Scan the START bar code
3. Scan the SET MSI/PLESSEY CODE I.D. bar code.
4. Turn to
Appendix B, Alpha-Numeric Pad
and '0' (the value determined in an earlier step to represent '@').
5. Scan the SET bar code to accept the digits scanned.
6. Turn to the
TION: BEFORE BAR CODE DATA label.
Features configured using the
universal and will affect all symbologies.
NOTE
7. Scan the END bar code to exit Programming Mode.
8. The resulting message string for scanned MSI/Plessey labels would
appear as follows:
Scanned bar code data:
Resulting message string output: @0123456789123
6-144
to find the corresponding hex values for your chosen
chapter and scan the CODE ID POSI-
Data Editing
Appendix A, ASCII Conver-
and scan the bar codes '4'
Data Editing
0123456789123
®
QuickScan QS6500/QS6500 BT
chapter are