Av Output Setup; Account Setup - Digimerge DH100 Series Instruction Manual

• Relay: Select the events that will trigger
the system relay (alarm block) to trigger
when an event occurs (HDD Error, Video
Loss, Motion or Sensor event).
2. Right-click and click Yes to save your
settings.

AV Output SETUP

The AV Output Setup menu allows you to
configure the system output resolution,
brightness ,and audio output volume.
To adjust the AV Output Setup settings:
1. Configure the following:
• VGA Resolution: Select from 800 x 600 /
1024 x 768 / 1280 x 1024
• Brightness, Contrast, Saturation, Hue:
Click -/+ to adjust the color values.
• Volume: Drag the volume bar to adjust the
output volume.
2. Right-click and click Yes to save your
settings.

Account Setup

The Account Setup menu allows you to
configure user accounts, and change the
admin password.
To Add a new user:
1. Under "No.", select the checkbox.
2. Under "User Name", enter the desired
user name.
3. Under "Password" enter the desired user
password.
4. Click Permission.
5. Beside "Password Expiry Date", select the
checkbox if you want the user password to
expire. Click the date, and enter the Year,
month, and date you want the password to
expire.
6. Select the type of menus you want the user
to have access to (i.e. Setup, PTZ, Utility
etc.)
7. Under "Remote & Playback Mask", select
the channels that you do not want the user
to have access to during remote viewing
and playback.
8. Right-click and click Yes to save your
settings.
To change the Admin password:
1. Under "Password", enter the current
administrator password.
Enter the old and new admin password
Using the Main Menu
39