Ptz Control Details; Network Setup; Configuring Network Type - Digimerge DH100 Series Instruction Manual

PTZ Control Details

• : Cancel all PTZ functions.
• : Assign preset number.
• : Go to preset.
• : Save current position as a preset.
• : Activate PIP (not supported on all
cameras).
• : Pause image (not supported on all
cameras).
• : Activate zoom.
• : Press to pan and tilt camera.
•
number input keys.
• : Backup settings (not supported on
all cameras).
• ZOOM: Click +/- to zoom in and out.
• FOCUS: Click +/- to focus in and out.
• IRIS: Click +/- to open and close iris.
: Auxiliary "AUTO", and

NETWORK SETUP

Configure network, email
notification, and DDNS options.

Configuring Network Type

You can set the system to be in DHCP mode
(the router assigns the DVR IP), or in Static IP
mode (the DVR IP is fixed).
To change the network type:
1. Click the DHCP, or STATIC IP checkbox.
• If you select DHCP, the router assigns your
DVR an IP address.
• If you select STATIC IP, beside the IP
Address, Subnet Mask, and Gateway fields,
enter the appropriate IP numbers.
2. Right-click and click Yes to save your
settings.
ADSL
Use the ADSL setting to connect the DVR
directly to a ADSL modem, without the use of a
router.
To configure ADSL settings:
1. Click the ADSL checkbox.
2. Beside USER ID, enter the ISP's user ID.
3. Beside Password, enter the ISP password.
4. Right-click and click Yes to save your
changes.
Using the Main Menu
33