Information - Digimerge DH100 Series Instruction Manual

Using the Main Menu
7. The system beeps several times, and the
screen turns black. This is normal.The
screen will remain black for up to 5
minutes, then beep again. 

Wait for the system to boot into the main
viewing mode for the firmware upgrade to
complete. Once the system boots into live
mode, the firmware is updated.
Do not remove the USB key during the
NOTE:
firmware update process.

Information

• Click the Information button to display
network and hard drive information, and
firmware version.
• You can also access the Information
window by pressing the INFO / 10+ button
on the remote control (4/8-channel) or by
pressing the INFO / 10+ button 2 times
(16-channel).
42