Front Panel - Digimerge DH100 Series Instruction Manual

FRONT PANEL

1 2
1. USB Port: Connect a USB mouse (included), connect a USB flash drive (not included) for data
backup or firmware upgrades, or connect a USB cable (not included) for a touch screen
monitor (not included).
2. IR receiver: IR receiver for the remote control. Keep the IR receiver clear from obstructions.
If your remote does not respond to the DVR, ensure the IR receiver is not blocked by objects.
3. Indicators:
• PWR: Glows green to indicate the system is on.
• REC: Glows red to indicate system is recording.
• NET: Glows orange to indicate network is active.
3
3