Kenwood TS-990S Service Manual page 203

Item Condition
31. HF PGC 1) Menu No.: 97 (14.1MHz, CW)
Transmit
• 100W
• 50W 2) Menu No.: 98 (14.1MHz, CW)
Transmit
• 25W 3) Menu No.: 99 (14.1MHz, CW)
Transmit
• 10W 4) Menu No.: 100 (14.1MHz,
CW)
Transmit
• 5W 5) Menu No.: 101 (14.1MHz,
CW)
Transmit
32. FM 1) Menu No.: 102 (29.1MHz,
deviation FM)
Transmit
• Wide
• Narrow 2) Menu No.: 103 (29.1MHz,
FM)
Transmit
33. SCOPE 1) Menu No.: 113 (14.1MHz,
gain CW)
Transmit
34. Protection 1) Menu No.: 105 (14.1MHz,
CW)
• 14M Transmit
Use a cable that is 1m long
TS-990
 (1m cable)
Power meter
 (Direct connection)
150 dummy load
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
Power Rear ANT1 Front
meter panel panel
500W ATT
Power Rear ANT1 Front
meter panel panel
Linear
detector
500W ATT
Power Rear ANT1 Front
meter panel panel
500W ATT
150 Rear ANT1 Front
dummy panel panel
load
Through
type
power
meter
TS-990S
Adjustment
Parts Method
[UP]/ Adjust the ALC ALC meter 35 dots
[+](F5) meter zone to maxi-
or mum.
[DOWN]
/[-](F4)
[UP]/ 4.2kHz ±0.05kHz
[+](F5) According to the
or larger +, –.
[DOWN]
/[-](F4)
2.1kHz ±0.05kHz
According to the
larger +, –.
[[UP]/ 1 push
[UP-
DATE]
(F5)
[UP]/ Set the adjustment 80W±2W
[+](F5) value wiithin the
or limit of the specifi ed
[DOWN] power.
/[-](F4)
Specifi cations/Remarks
203