Kenwood TS-990S Service Manual page 187

Item Condition
MAIN RX 2) Menu No.: 31 (50.2MHz, FM)
50M FM S- FIL/SEL(M): 15kHz
meter SSG f.: 50.200MHz
SSG output: –95dBm
• Full scale (3.98µV)
(Lights up MOD: 1kHz
all) DEV: 3kHz
• Full scale 3) Menu No.: 32 (50.2MHz, FM)
2 (Lights up FIL/SEL(M): 15kHz
all) SSG f.: 50.200MHz
SSG output: -81dBm
(19.9µV)
MOD: 1kHz
DEV: 3kHz
41. MAIN RX 1) Menu No.: 33 (50.2MHz, FM)
50M FM SQL FIL/SEL(M): 15kHz
threshold SSG f.: 50.200MHz
SSG output: OFF
MOD: 1kHz
DEV: 3kHz
42. MAIN RX 1) Menu No.: 34 (50.2MHz, FM)
50M FM SQL FIL/SEL(M): 15kHz
tight SSG f.: 50.200MHz
SSG output: –113dBm
(0.501µV)
MOD: 1kHz
DEV: 3kHz
43. SCOPE 1) Menu No.: 35 (14.2MHz, CW)
gain P.AMP: ON
FIL/SEL(M): 2.7kHz
SSG f.: 14.2MHz
SSG output: –40dBm
(2.24mV)
44. SUB 1) Menu No.: 40 (14.2MHz,
RX AGC USB)
start level P.AMP: ON
(73M/6kHz) FIL/SEL(S): 10M 6kHz
AGC: OFF
SSG f.: 14.201MHz
SSG output: –110dBm
(0.707µV)
45. SUB RX 1) Menu No.: 41 (14.2MHz,
AGC start USB)
level P.AMP: ON
(73M/ FIL/SEL(S): 10M 2.7kHz
2.7kHz) AGC: OFF
SSG f.: 14.201MHz
SSG output: –110dBm
(0.707µV)
ADJUSTMENT
Measurement
Test-
Unit Terminal Unit
equipment
SSG Rear ANT 1 Front
panel panel
TS-990S
Adjustment
Parts Method
[UP]/ Set the SSG, press
[UP- the [UP]/[UPDATE]
DATE] (F5) key.
(F5)
[UP]/[+] Using the [UP]/[+]
(F5) or (F5) or [DOWN]/[-]
[DOWN] (F4) key, adjust to
/[-](F4) the point when "A/D
data" displays "1" for
the fi rst time.
Specifi cations/Remarks
187