Table of Contents
Advertisement
The Console Setup Mode lets you control the sound settings, or see maintenance statistics (Total Run Hours and Software Version).
1.
Push and hold down the Burn Rate/Increase and PAUSE/END buttons for 3 seconds while in the Power-Up Mode to go into the Console Setup
Mode.
Note: Push PAUSE/END to exit the Console Setup Mode and return to the Power-Up Mode screen.
2.
The Console display shows the Sound Settings prompt with the current setting. Push the Burn Rate/Increase or Burn Rate/Decrease buttons to
change between the settings of "OFF" and "1" through "7". A setting of 7 is the loudest sound level.
3.
Push ENTER to set.
4.
The Console display shows the TOTAL RUN HOURS for the machine.
5. For the next prompt, push the ENTER button.
6. T he Console display shows the Software Version prompt.
7. Push the ENTER button to exit the Console Setup Mode.
The Console will display the Power-Up Mode screen.
Console Setup Mode
36
Assembly / Owner's Manual
Hide quick links:
Advertisement
Table of Contents
