Table of Contents
Advertisement
Bluetooth® Heart Rate Strap (not supplied)
Your fitness machine is equipped to be able to receive a signal from a Bluetooth® Heart Rate Strap. When
connected, the Console will display the Bluetooth® Heart Rate Detected icon.
If you have a pacemaker or other implanted electronic device, consult your doctor before using a
Bluetooth® strap or other Bluetooth® heart rate monitor.
1. Put on your Bluetooth® Heart Rate Strap.
2. If equipped, push the On/Off button on your strap to activate it. The Console actively searches for any devices
in the area, and should connect to the strap when in range.
Changing Unit Measures (English Imperial/Metric)
To switch units between kilometers and miles before a workout, push the Enter/Start button and hold for 3
seconds to enter the Console Setup Mode. The System Units prompt appears. Push an Increase/Decrease button
to change the units (KM or MI). With the desired unit of distance displayed, push the Pause/Stop button to save.
Note: The default distance unit is MI.
Console Setup Mode – System Menu
The Console Setup Mode allows you to set units of measurement to either Imperial or metric, adjust screen
brightness, view maintenance statistics (such as Run Time hours and software version – for service technician use
only), or reset the Console.
1. Push the Enter/Start button and hold for 3 seconds while in the Power-Up Mode to go into the Console Setup
Mode (System Menu).
Note: Push the Pause/Stop button to save and exit the System Menu and return to the Power-Up Mode screen. The Console will
display "Settings Saved" before exiting to the System Menu.
2. The Console display shows the System Units prompt with the current setting. The default setting is Imperial
English units. Push the Increase/Decrease buttons to change between Imperial (MI/LB) and metric (KM/KG).
Note: If the units change when there is data in User Statistics, the statistics convert to the new units.
3. Push the Enter/Start button to set the selection and continue to the next menu option.
Note: To save the selection and exit the System Menu, push the Pause/Stop button.
4. The Console display shows the Screen Brightness prompt with the current setting. The levels of brightness are:
5 (100%), 4 (80%, default), 3 (65%), 2 (50%), 1 (35%). The display shows the brightness of the selected level. Push
the Increase/Decrease buttons to move to the desired level.
5. Push the Enter/Start button to set the selection and continue to the next menu option.
6. The Console display shows the Volume prompt with the current setting for the Console beeps. The volume levels
are: Off, Low, Medium (default), High. Push the Increase/Decrease buttons to move to the desired level. It does
not affect the output from your personal device.
7. Push the Enter/Start button to set the selection and continue to the next menu option.
8. The Console display shows the Disconnect Bluetooth prompt. The default option is NO. The YES option will
disconnect all Bluetooth® devices. Push the Increase/Decrease buttons to change between options (YES/NO).
9. Push the Enter/Start button to set the selection and continue to the next menu option.
10. The Console display shows the Auto Connect HR (Heart Rate) prompt. The default option is YES. Push the
Increase/Decrease buttons to change between options (YES/NO).
11. Push the Enter/Start button to set the selection and continue to the next menu option.
The Bluetooth® Heart Rate Detected icon will activate when connected. You are ready to
work out.
At the end of your workout, push the On/Off button (if equipped) to disconnect your
Heart Rate Strap from the Console.
12
Advertisement
Table of Contents
