Public And Anonymous Share Access Rights - ZyXEL Communications NSA-220 Plus User Manual

Chapter 10 Shares
The following table describes the labels in this screen.
Table 53 Sharing > Shares > Add Share (or Edit Share) > Advanced
LABEL
Available Users/
Groups
Authority
Apply
Cancel

10.3.2 Public and ANONYMOUS Share Access Rights

If you make a share public, users do not need to log in.
With ANONYMOUS FTP, you must enter either 'anonymous' or 'ftp' as the
username. Any other name is considered a username, so must be valid and have a
corresponding correct password.
200
DESCRIPTION
This field lists the users/groups you can assign access rights.
Use this field to assign access rights to users/groups.
Full Control gives users/groups full access (read, write and
execute) to all files contained within this share.
Read-Only gives users/groups read-only access (they cannot
modify nor execute) to all files contained within this share.
Deny blocks access (users/groups cannot read, modify, nor
execute) to all files contained within this share.
Among all access rights, Deny has the highest priority. For
example, User A belongs to Group 1. You assign User A full
access rights to the Music share but deny access rights to Group
1. Then User A cannot access the Music share.
Note: If you deny access to all users, no-one can use the
share, not even the administrator.
Click an arrow button to move users/groups between the left
and right fields. Use the arrow buttons to assign access rights to
users/groups.
Click this to save your changes.
Click this to return to the previous screen without saving.
NSA-220 Plus User's Guide