The Pppoe Screen - ZyXEL Communications NSA-220 Plus User Manual

Network storage appliance
Hide thumbs Also See for NSA-220 Plus:
Table of Contents

Advertisement

6.3 The PPPoE Screen

Click Network > PPPoE in the navigation panel to open the following screen.
PPPoE allows the NSA to establish a direct Internet connection.
Figure 28 Network > PPPoE
The following table describes the labels in this screen.
Table 25 Network > PPPoE
LABEL
Status
Status
IP Address
IP Subnet Mask
Configuration
Enable PPPoE
Connection
Username
Password
Password
(Confirm)
Apply
Reset
NSA-220 Plus User's Guide
DESCRIPTION
This field displays the status of PPPoE connection.
This field displays the IP address of your PPPoE connection.
This field displays the IP subnet mask of your PPPoE connection.
Select this option to establish a direct Internet connection for the NSA.
You need to enter the username and password as given by your ISP.
Enter the username exactly as your ISP assigned. If assigned a name
in the form user@domain where domain identifies a service name,
then enter both components exactly as given.
Enter the password associated with the username above.
Retype the password for confirmation.
Click this to save your changes.
Click this to restore previously saved settings.
Chapter 6 Network
129

Advertisement

Table of Contents
loading

Table of Contents