Public And Anonymous Share Access Rights; Share Path Browse Screen; Figure 89 Share Path Browse - ZyXEL Communications NSA-220 User Manual

Chapter 10 Shares
Table 40 Shares > Add Share (or Change Share Properties) (continued)
LABEL
Full
Read Only
Deny
Apply
Cancel

10.2.1 Public and ANONYMOUS Share Access Rights

If you make a share public, users do not need to log in.
With ANONYMOUS FTP, you must enter either 'anonymous' or 'ftp' as the username. Any
other name is considered a username, so must be valid and have a corresponding correct
password.

10.3 Share Path Browse Screen

Use this screen to navigate and/or create folders within a share.

Figure 89 Share Path Browse

122
DESCRIPTION
Select this check box next to a user to give him or her full access (read, write and
execute) to all files contained within this share. Select the check box in the
heading row to select all users.
Select this check box next to a user to give him or her read-only access (they
cannot modify nor execute) to all files contained within this share. Select the check
box in the heading row to select all users.
Select this check box next to a user to deny him or her any access (they cannot
read, modify, nor execute) to all files contained within this share. Select the check
box in the heading row to select all users.
Note: If you deny access to all users, no-one can use the share, not
even the administrator.
Click this button to save your changes back to the NSA.
Click this button to close this screen without saving your changes.
NSA-220 User's Guide