Print Server Rename - ZyXEL Communications NSA-220 Plus User Manual

The following table describes the labels in this screen.
Table 36 Applications > Print Server
LABEL DESCRIPTION
Refresh Click this to update the list of printers and print jobs.
The table lists printers and their queued print jobs. Click a column's heading to
sort the entries by that criteria.
Status This fields shows whether the printer is connected and turned on (on-line) or
not (off-line).
Name This identifies the printer. Each printer connected to the NSA must use a
unique name.
Actions Rename: Click this to change the name the NSA uses for the printer.
Cancel Job: Click this to remove all print jobs from the NSA queue for a
particular printer. However, since the NSA sends print jobs to the printer as
soon as it can, this button may only have an effect if there are very large or
many print jobs in the queue. To stop a print job that has already started, you
may have to turn off the printer.
Delete: Click this to remove a printer from the NSA's printer list. To add the
printer back into the list, disconnect the printer from the NSA's USB port and
reconnect it. If that does not work, disconnect the USB port and turn off the
printer's power. Then reconnect the printer and turn it back on.

7.7.3 Print Server Rename

Click Applications > Print Server and a printer's Rename icon to open the
following screen. Use this screen to change the name the NSA uses for the printer.
Figure 51 Applications > Print Server > Rename
The following table describes the labels in this screen.
Table 37 Applications > Print Server > Rename
LABEL DESCRIPTION
Name Type a new name to identify the printer. The name must be unique from all the
other names of printers connected to the NSA.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
NSA-220 Plus User's Guide
Chapter 7 Applications
163