Adding A Download Task - ZyXEL Communications NSA-220 Plus User Manual

Chapter 7 Applications

7.4.3 Adding a Download Task

Click Applications > Download Service > Add to open the following screen.
Use this screen to specify a file for the NSA to download.
provides a tutorial on adding a download task.
Figure 33 Applications > Download Service > Add
The following table describes the labels in this screen.
Table 29 Applications > Download Service > Add
LABEL
URL
Torrent File
Default
Destination
Volume
Path
142
DESCRIPTION
Paste the URL of the file you want to download into this field. The URL can
be for an HTTP, FTP, or BitTorrent download.
For a BitTorrent download, you can copy and paste the URL of the .torrent
file. The NSA will automatically download the .torrent file and use it. You do
not have to manually download the .torrent file or save it to your computer.
Note: Make sure the link opens either the file you want or a pop-up
window about how to handle the file.
It is also OK for the link to open a .torrent file. If you are redirected to a
screen that says the download should start in a few seconds, there may be
a link to click if the download does not start automatically. See if that link
opens the file or the pop-up window.
A "torrent" file has information the NSA uses to do a BitTorrent download. A
torrent file uses a .torrent extension. If you already have a torrent file saved
on your computer, select the Torrent File option and specify its path or
click Browse and look for its location.
This shows where the NSA stores files after downloading them.
This is the volume where the NSA saves downloaded files.
This is the location of the share where the NSA will save the downloaded
files. Click Edit to go to a screen where you can set the default location for
saving downloads and configure your BitTorrent settings.
Section 3.3 on page 59
NSA-220 Plus User's Guide