JVC GR-DVL9800 Instructions Manual page 81

SYMPTOM
15. The image taken using
Snapshot is too bright.
16. Digital Zoom does not
work.
17. Programme AE with
special effects and Fade/
Wipe Effects do not work.
18. The Black & White Fader
does not work.
19. The Dissolve function does
not work.
POSSIBLE CAUSES
15. •"FLASH" is set to "ON" in
the Menu Screen.
•The subject is too bright.
16. •10X optical zoom is
selected.
•The Shooting Mode Dial is
set to "DUAL", "VGA" or
"XGA".
•"P.AE/EFFECT" is set to
"VIDEO ECHO" in the
Menu Screen.
•"WIDE MODE" is set to "PS
WIDE" in the Menu Screen.
•Multi-Analyser 4 or Multi-
Analyser 9 was attempted
during Digital Zoom.
•High Speed Recording was
attempted.
•Picture Wipe or Dissolve are
being used in a scene
transition.
17. •The Power Switch is set to
" ".
•Some functions are disabled
during High Speed
Recording.
18. •The Sepia or Monotone
mode is activated.
19. •The Sepia, Monotone or
Slow Shutter mode of
Programme AE with special
effects is activated.
•"WIDE MODE" is set to
"SQUEEZE" or "PS WIDE"
in the Menu Screen.
•The previously selected
mode of Programme AE
with special effects was
changed after the last
selected scene for editing
was registered.
CORRECTIVE ACTION
15. •Set "FLASH" to any
parameter other than "ON"
in the Menu Screen
( pg. 34).
•Push down the flash.
•Press the SPOTLIGHT
Button ( pg. 42).
16. •Set "ZOOM" to "40X" or
"200X" in the Menu Screen
( pg. 31).
•Set the Shooting Mode Dial
to "PS" or "VIDEO"
( pg. 15, 22).
•Disengage the "VIDEO
ECHO" mode (
41).
•Disengage the "PS WIDE"
mode ( pg. 32).
•Disengage Multi-Analyser 4
or Multi-Analyser 9
( pg. 19).
•Release High Speed
Recording ( pg. 28).
•Wait until the Picture Wipe
or Dissolve effects are
completed ( pg. 22, 38).
17. •Set the Power Switch to
" " ( pg. 38, 40).
• pg. 28.
18. •Turn off Sepia and Mono-
tone ( pg. 38, 40).
19. •Turn off Sepia, Monotone or
Slow Shutter before adding
Dissolve to a scene
transition ( pg. 38, 40).
•Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 32).
•Make sure you have
selected the mode of
Programme AE with special
effects you want before
starting editing
( pg. 38, 40).
CONTINUED ON NEXT PAGE
81
EN
pg. 22,