Advanced Features For D.s.c - JVC GR-DVL9800 Instructions Manual

50
EN
Display
D S C M E NU
1 R E T U R N
P R O T E C T
I M A G E D E L .
F R A M E D E L .
F O R M A T
D P O F
E X I T P R O T E C T
0 0 1 F 0 0 2 S
0 0 4 F 0 0 5 F
Normal playback
E X I T P R O T E C T
0 0 1 F 0 0 2 S
0 0 4 F 0 0 5 F
Normal playback
MENU/BRIGHT
Wheel
Power Switch
Lock Button
Menu Screen
PROTECT Index
Screen
0 0 3 E
0 0 6 F
Padlock mark
If Protection is
removed
0 0 3 E
0 0 6 F
PLAYBACK
Protecting Images
The Protect mode helps prevent the accidental erasure of
images. When a padlock mark is displayed next to the
Picture Quality Mode indication, that image cannot be
deleted.
1
Set the Power Switch to "
down the Lock Button. Open the LCD monitor fully
or pull out the viewfinder fully.
•A stored image is displayed.
2
Press MENU/BRIGHT. The Menu Screen appears.
Rotate it to select "
appears.
3
Rotate MENU/BRIGHT to select "PROTECT" and
press it. The PROTECT Index Screen appears.
TO PROTECT AN IMAGE
Before doing the following, perform steps 1 through 3
above.
4
Rotate MENU/BRIGHT to move the green frame to
the desired image and press it. A "
appears on the selected image.
Repeat this procedure for all images you do not wish
to delete by accident.
5
Rotate MENU/BRIGHT upward to select "EXIT" and
press it. The normal playback screen appears.
NOTE:
When the memory is initialised or corrupted, even
protected images are deleted. If you do not want to lose
important images, transfer them to a PC and save them.
TO REMOVE PROTECTION
Before doing the following, perform steps 1 through 3
above.
4
Rotate MENU/BRIGHT to move the green frame to
the desired image and press it. The "
mark located above the image disappears and the
image is no longer protected.
Repeat this procedure for all images from which you
wish to remove protection.
5
Rotate MENU/BRIGHT upward to select "EXIT" and
press it. The normal playback screen appears.

Advanced Features For D.S.C.

" and press it. "DSC MENU"
" while pressing
" padlock mark
" padlock