JVC GR-DVL9800 Instructions Manual page 63

To S-VIDEO
Core filter
S-Video cable
(provided)
Cable Adapter
(not provided)
If your VCR has a
SCART connector,
use a commercially
available output
cable adapter.
VCR (Playback deck)
TV
* Connect when an S-Video cable is not used.
** When connecting the cables, open this cover.
Connector
cover**
To AV
Core filter
Audio/Video cable
[mini-plug to RCA plug]
(provided)
To Audio, Video* and
S-Video connectors
Dubbing Images/Sounds Recorded On A
Tape To Another Tape
[To use this camcorder as a recorder: Only
for GR-DVL9800 owners]
1
Make sure all units are turned off, then connect the
camcorder and the VCR as shown in the illustration.
Also refer to pg. 58 and 59.
2
Set "SOUND MODE" to "12 BIT" or "16 BIT" and
"REC MODE" to "SP" or "LP" in the Menu Screen
depending on your preference (
3
Set the camcorder's Power Switch to "
pressing down the Lock Button located on the switch.
Turn on the VCR's power and insert the appropriate
cassettes in the camcorder and the VCR.
4
Set "AV/S-VIDEO" to "ON" in the Menu Screen to
engage the analogue input mode (
5
Press the Recording Start/Stop Button on the
camcorder to engage the Record-Pause mode. "AV.
IN" appears on the screen.
6
Engage the VCR's Play mode, then engage the Still
Playback mode when you have found a spot just
before the edit-in point.
7
Press the Recording Start/Stop Button on the
camcorder to engage the Record mode. "
appears on the screen. Engage the VCR's Play mode.
8
To stop dubbing, press the Recording Star/Stop Button
on the camcorder so that "AV. IN" reappears, then
engage the VCR's Stop mode.
9
Repeat steps 6 through 8 for additional editing.
10
Set "AV/S-VIDEO" back to "OFF" in the Menu Screen
to disengage the analogue input mode (
NOTES:
Use the provided cables, making sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
To use an output cable adapter (commercially
available), refer to its instructions.
It is recommended to use the AC Power Adapter/
Charger as the power supply instead of the battery pack
( pg. 7).
Analogue signals can be converted to digital signals with
this procedure.
It is also possible to dub from another camcorder.
63
EN
pg. 11, 30, 31).
" while
pg. 46).
"
AV. IN
pg. 46).