Table of Contents
Advertisement
Quick Links
DIGITAL VIDEO CAMERA
GR-DVL915
GR-DVL715
GR-DVL515
GR-DVL510
GR-DVL410
GR-DVL310
Please visit our Homepage on the World Wide Web and
answer our Consumer Survey (in English only):
http://www.jvc-victor.co.jp/english/index-e.html
数码说明书之家
2005.08.29
www.54gg.com
INSTRUCTIONS
数码说明书之家
2005.08.29
www.54gg.com
The camcorder illustrations
appearing in this instruction
manual are of the GR-DVL915.
CONTENTS
AUTOMATIC
DEMONSTRATION
GETTING STARTED
VIDEO RECORDING &
PLAYBACK
VIDEO RECORDING ............ 16 – 20
VIDEO PLAYBACK .............. 21 – 24
DIGITAL STILL CAMERA (D.S.C.)
RECORDING &
PLAYBACK
D.S.C. RECORDING ............ 26 – 27
D.S.C. PLAYBACK .............. 28 – 36
ADVANCED
FEATURES
FOR RECORDING ................ 38 – 45
USING MENUS FOR
DETAILED ADJUSTMENT ...... 46 – 51
DUBBING ......................... 52 – 56
USING THE REMOTE
CONTROL UNIT ................ 57 – 67
SYSTEM CONNECTIONS ........ 68 – 69
REFERENCES
DETAILS ................................... 71
TROUBLESHOOTING ............ 72 – 76
USER MAINTENANCE ................... 77
INDEX ............................. 78 – 84
CAUTIONS ........................ 85 – 87
TERMS ............................ 88 – 89
SPECIFICATIONS ................. 90 – 91
The D.S.C. (Digital Still Camera) features
are available on GR-DVL915, GR-DVL715
and GR-DVL515.
LYT0750-001A
ENGLISH
6
7 – 14
15 – 24
25 – 36
37 – 69
70 – 91
EN
Advertisement
Table of Contents
Related Manuals for JVC GR-DVL715
Summary of Contents for JVC GR-DVL715
- Page 1 TERMS ......88 – 89 SPECIFICATIONS ....90 – 91 数码说明书之家 2005.08.29 The camcorder illustrations The D.S.C. (Digital Still Camera) features appearing in this instruction are available on GR-DVL915, GR-DVL715 www.54gg.com manual are of the GR-DVL915. and GR-DVL515. INSTRUCTIONS LYT0750-001A...
- Page 2 AC adapter under these conditions could lead to fire or electric MOISTURE. shock. Contact your JVC dealer. Do not attempt to repair the malfunction yourself. To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to Caution on Replaceable lithium battery qualified personnel.
- Page 3 LCD monitor/viewfinder playback are possible this unit. anywhere. (If water or liquid is allowed to enter this ● Use the JVC BN-V408U/V416U/V428U battery equipment, fire or electric shock may be packs and, to recharge them or to supply caused.) power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter and Power Cord.
- Page 4 Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user. When carrying, be sure to always securely attach and use the provided shoulder strap.
- Page 5 PROVIDED ACCESSORIES •Remote Control Unit • AC Adapter RM-V711U AP-V10ED • Power Cord •Battery Pack BN-V408U • Shoulder Strap •Lithium Battery CR2025 (for remote control unit) •Lens Cap (Already attached to the camcorder) •Memory Card (8 MB) (GR-DVL915/DVL715/ DVL515 only) (Already inserted in the •...
- Page 6 How To Attach The Core Filter Attach the Core Filter(s) (if provided with your model pg. 5) to an optional cable(s). The Core Filter reduces interference. 3 cm Stopper Wind once Release the Run the cable through the Core Filter, leaving approx. Close the Core Filter until it stoppers on both 3 cm of cable between the cable plug and the Core...
-
Page 7: Table Of Contents
GETTING STARTED 数码说明书之家 2005.08.29 www.54gg.com GETTING STARTED CONTENTS Power ............8 – 9 Grip Adjustment ..........10 Viewfinder Adjustment ........10 Shoulder Strap Attachment ........10 Tripod Mounting ..........10 Date/Time Settings........... 11 Loading/Unloading A Cassette ......12 Recording Mode Setting ........13 Loading A Memory Card ...... -
Page 8: Power
GETTING STARTED (cont.) Power BAT. RELEASE Switch This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK Tilt the viewfinder upward . - Page 9 AA-V15 AC Power Adapter/Charger for BN-V840U battery pack and only AA-V80 AC Power Adapter/Charger for BN-V856U battery pack. Also, by using the optional JVC VC-VBN856U DC Cord, it will be possible to connect BN- V840U or BN-V856U battery packs to the camcorder and supply power directly to the camcorder.
-
Page 10: Grip Adjustment
GETTING STARTED (cont.) Grip Adjustment Power Zoom Lever Separate the Velcro strip. Pass your right hand through the loop and grasp Recording Start/ Stop button the grip. Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button and Power Switch and Power Zoom Lever. -
Page 11: Date/Time Settings
Date/Time Settings MENU/BRIGHT Wheel The date/time is recorded onto the tape at all times, but its Power Lamp display can be turned on or off during playback pg. 50, 51). Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. -
Page 12: Loading/Unloading A Cassette
GETTING STARTED (cont.) Loading/Unloading A Cassette Erase protection tab* The camcorder needs to be powered up to load or eject a cassette. Make sure the Slide and hold OPEN/EJECT in the direction of the window side is arrow then pull the cassette holder cover open until it facing out. -
Page 13: Recording Mode Setting
Recording Mode Setting MENU/BRIGHT Wheel Set the tape recording mode depending on your preference. Power Lamp Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on. Press the MENU/BRIGHT wheel in. -
Page 14: Loading A Memory Card (Gr-Dvl915/Dvl715/Dvl515 Only)
GETTING STARTED (cont.) Clipped edge MENU/BRIGHT Wheel Memory card Label Power Lamp Display QUAL I – F I NE S I ZE – STANDARD Card Cover Lock Button UXGA – – AUTO Power Switch RETUR Loading A Memory Card Picture Quality Mode Setting (GR-DVL915/DVL715/DVL515 only) (GR-DVL915/DVL715/DVL515 only) The provided memory card is already inserted in the... - Page 15 VIDEO RECORDING & PLAYBACK VIDEO RECORDING & PLAYBACK CONTENTS VIDEO RECORDING ....... 16 – 20 Basic Recording ........16 Journalistic Shooting ........ 17 Self-Recording ........17 Operation Mode ........17 Zooming ..........18 Video Light .......... 19 Time Code ..........20 VIDEO PLAYBACK ......
-
Page 16: Video Recording
VIDEO RECORDING Basic Recording Power lamp Power Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( pg. 8) ● Grip Adjustment ( pg. 10) ● Viewfinder Adjustment ( pg. 10) ●... -
Page 17: Journalistic Shooting
JOURNALISTIC SHOOTING In some situations, different shooting angles may Self-Recording provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270° (90° downward, 180° upward). SELF-RECORDING You can shoot yourself while viewing your own image in the LCD monitor. -
Page 18: Zooming
VIDEO RECORDING (cont.) Zoom in (T: Telephoto) Zooming FEATURE: PURPOSE: 1 x W 10 x W To produce the zoom in/out effect, or an instantaneous 20 x W change in image magnification. 40 x W OPERATION: Zoom In Slide the Power Zoom Lever towards “T”. Zoom Out Zoom out (W: Wide angle) Slide the Power Zoom Lever towards “W”. -
Page 19: Video Light
39) is materials. engaged, the light will not activate. It is recommended that you consult your • While the “Night-Scope” mode ( pg. 38) is nearest JVC dealer for replacing the video engaged, the light will not activate. light. -
Page 20: Time Code
VIDEO RECORDING (cont.) Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). -
Page 21: Video Playback
VIDEO PLAYBACK Normal Playback Load a tape ( pg. 12). Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/ DVL715/DVL515 only), then set the Power Switch to “ ” while pressing down the Lock Button located Lock Button on the switch. To start playback, press 4/6. Power Switch •To stop playback, press 5. -
Page 22: Connections
VIDEO PLAYBACK (cont.) Connections A. Connection to a TV or VCR equipped with an S-VIDEO IN and A/V input connectors Connector cover* S-Video cable To TV or VCR To S-VIDEO (optional) To S-VIDEO IN To AV White to AUDIO L IN** Red to Audio/Video cable AUDIO R IN**... - Page 23 NOTES: Make sure all units are turned off. ● It is recommended to use the AC Adapter as the power supply instead of the battery pack pg. 9). Connect the camcorder to a TV or VCR as ● To monitor the picture and sound from the shown in the illustration ( pg.
-
Page 24: Blank Search
VIDEO PLAYBACK (cont.) Blank Search BLANK SEARCH Button Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( pg. 20). Load a tape ( pg. 12). Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/ DVL715/DVL515 only), then set the Power Switch to “... - Page 25 DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK The D.S.C. (Digital Still Camera) features are available on GR-DVL915, GR-DVL715 and GR-DVL515. CONTENTS D.S.C. RECORDING ......26 – 27 Basic Shooting (Snapshot) ....26 – 27 D.S.C. PLAYBACK ......28 – 36 Normal Playback ........
-
Page 26: D.s.c. Recording
D.S.C. RECORDING Basic Shooting (Snapshot) SNAPSHOT Button You can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: You should already have performed the procedures listed below. If not, do so before continuing. ● Power ( pg. 8) ●... - Page 27 To Delete Unwanted Still Images . . . PIN-UP ..when unwanted still images are stored in the memory Pin-Up mode* card or its memory is full, refer to “Deleting Images” pg. 32) and delete unwanted still images. To Remove The Shutter Sound ..
-
Page 28: D.s.c. Playback
D.S.C. PLAYBACK Normal Playback Fast-Forward (3) Button Lock Button Images shot with the camcorder are automatically Play (4/6) Button numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much Rewind (2) like flipping through a photo album. -
Page 29: Index Screen
INDEX Screen Picture quality The images you shot can be displayed together with their Index number Selected image index information. Convenient for checking images shot beforehand, the INDEX Screen also shows the Picture < > E X I T I N D E X quality as well as which images are protected against 100-DVC00003 accidental erasure. -
Page 30: Jump Playback
D.S.C. PLAYBACK (cont.) Jump Playback MENU/BRIGHT Wheel When viewing still images stored in a memory card, you JUMP Button can call up directly an image you want to view by specifying its index number. Press JUMP during Normal Playback ( pg. -
Page 31: Protecting Images
Protecting Images MENU/BRIGHT Wheel The Protect mode helps prevent the accidental erasure of images. When a padlock mark is displayed next to the Picture Quality indication, that image cannot be deleted. Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “... -
Page 32: Deleting Images
D.S.C. PLAYBACK (cont.) Deleting Images MENU/BRIGHT Wheel Previously shot images can be deleted either one at a time or all at once. Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “ ” while pressing down the Lock Button. - Page 33 TO DELETE ALL IMAGES MENU/BRIGHT Wheel Before doing the following, perform steps 1 through 3 on pg. 32. Rotate the MENU/BRIGHT wheel to select “ALL” and press it. The Deletion Confirmation Screen appears. Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it. All the images are deleted. •To cancel deletion, rotate the MENU/BRIGHT wheel to select “CANCEL”...
-
Page 34: Setting Print Information
D.S.C. PLAYBACK (cont.) Setting Print Information (DPOF Setting) MENU/BRIGHT Wheel This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). - Page 35 TO PRINT BY SELECTING STILL IMAGES MENU/BRIGHT Wheel AND NO. OF PRINTS Perform steps 1 through 3 on pg. 34. Rotate the MENU/BRIGHT wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears. Rotate the MENU/BRIGHT wheel to move the green frame to the image you wish to print and press it.
-
Page 36: Initialising A Memory Card
D.S.C. PLAYBACK (cont.) Initialising A Memory Card MENU/BRIGHT Wheel You can initialise a memory card anytime. After initialising, all images and data stored in the memory card, including those which have been protected, are cleared. Set the VIDEO/DSC Switch to “ ”, then set the Power Switch to “... - Page 37 ADVANCED FEATURES ADVANCED FEATURES CONTENTS FOR RECORDING ..........38 – 45 Night-Scope ..............38 Programme AE With Special Effects ....... 38 – 39 Fade/Wipe Effects ..........40 – 41 Snapshot (For Video Recording) ........... 42 Auto Focus/Manual Focus ..........43 Exposure Control ............
-
Page 38: For Recording
FOR RECORDING Night-Scope NOTES: ● During Night-Scope, the following functions Makes dark subjects or areas even brighter than they or settings cannot be activated and its would be under good natural lighting. Although the indicator blinks or goes out: recorded image is not grainy, it may look as if it is strobing •... - Page 39 SHUTTER MONOTONE 1/50–The shutter speed is fixed at 1/50th of a Like black and white films, your footage is shot in second. Black bands that usually appear when B/W. Used together with the Cinema mode, it shooting a TV screen become narrower. enhances the “classic film”...
-
Page 40: Fade/Wipe Effects
FOR RECORDING (cont.) Fade/Wipe Effects FADE/WIPE SELECTION ( These effects let you make pro-style scene Fade or Wipe works when video recording is started or transitions. Use them to spice up the transition when you stop recording. from one scene to the next. You can also vary transitions from scene to scene. - Page 41 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. FADER — WHITE Fade in or out with a black screen. FADER — BLACK Fade in to a colour screen from a black and white screen, or fade out FADER —...
-
Page 42: Snapshot (For Video Recording)
FOR RECORDING (cont.) Snapshot (For Video Recording) SNAPSHOT Button This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/ DVL715/DVL515 only), then set the Power Switch to “... -
Page 43: Auto Focus/Manual Focus
While focusing on a further While focusing on a nearer Focus detection zone subject subject Auto Focus FEATURE: PURPOSE: The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): •When two subjects overlap in the same scene. -
Page 44: Exposure Control
FOR RECORDING (cont.) Exposure Control Iris Lock Use this function in the following situations: Manual exposure adjustment is recommended in the • When shooting a moving subject. following situations: • When the distance to the subject changes (so its • When shooting using reverse lighting or when the size in the LCD monitor or the viewfinder changes), background is too bright. -
Page 45: White Balance Adjustment
White Balance Adjustment Manual White Balance Operation A term that refers to the correctness of colour Perform Manual White Balance when shooting under reproduction under various lighting. If the white various types of lighting. balance is correct, all other colours will be Follow steps 1 through 4 of the white balance accurately reproduced. -
Page 46: Using Menus For Detailed Adjustment
USING MENUS FOR DETAILED ADJUSTMENT For Recording Menu MENU/BRIGHT Wheel This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( pg. 47 – 49) . Set the Power Switch to “ ”... - Page 47 Menu Screen Explanations Refer to “Fade/Wipe Effects” ( pg. 40, 41). WIPE/FADER Refer to “Programme AE With Special Effects” ( pg. 38, 39). PROGRAM AE Refer to “White Balance Adjustment” and “Manual White Balance W.BALANCE Operation” ( pg. 45). Allows you to set the video recording mode (SP or LP) depending on your REC MODE preference ( pg.
- Page 48 USING MENUS FOR DETAILED ADJUSTMENT (cont.) Menu Screen Explanations (cont.) Usually the distance to a subject where the lens is in focus depends on the TELE MACRO zoom magnification. Unless there is a distance more than 1m to the subject, the lens is out of focus at the maximum telephoto setting.
- Page 49 DEMO Automatic demonstration will not take place. MODE Demonstrates certain functions such as Programme AE with special effects, etc., and can be used to confirm how these functions operate. When “DEMO MODE” is set to “ON” and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstration stops the demonstration temporarily.
-
Page 50: For Playback Menu
USING MENUS FOR DETAILED ADJUSTMENT (cont.) For Playback Menu MENU/BRIGHT Wheel The following procedure applies to all except Synchro Comp ( pg. 65). Power Set the Power Switch to “ ” while pressing down Switch the Lock Button located on the switch. Press the MENU/BRIGHT wheel in. - Page 51 Menu Screen Explanations (cont.) DISPLAY ON SCREEN setting: 12B I T / SOUND1 SP 4 100-0001 1 / 50 Each setting is linked with “ DISPLAY” or “ SYSTEM”, which appears when the Power Switch is set to “ ” ( pg.
-
Page 52: Dubbing
DUBBING Dubbing To A VCR Power Switch [To use this camcorder as a player] Connector cover** Following the illustration, connect the camcorder and the VCR. Also refer to pg. 22 and 23. Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL915/DVL715/DVL515 only), then set the camcorder’s Power Switch to “... -
Page 53: Dubbing From A Vcr (Gr-Dvl915/Dvl715 Only)
Dubbing From A VCR Power Switch [To use this camcorder as a recorder: GR-DVL915/DVL715 only] Connector cover** Make sure all units are turned off, then connect the camcorder and the VCR as shown in the illustration. Also refer to pg. 22 and 23. Set “SOUND MODE”... -
Page 54: Dubbing To Or From A Video Unit Equipped With A Dv Connector
DV connector. ● When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable. To Use This Camcorder As A Recorder . . . -
Page 55: Dubbing Images Stored In A Memory Card To A Tape (Gr-Dvl915/Dvl715/Dvl515 Only)
Dubbing Images Stored In A Memory Card SNAPSHOT Button To A Tape (GR-DVL915/DVL715/DVL515 only) Images can be dubbed from a memory card to a tape. Load a memory card ( pg. 14) and cassette pg. 12). To locate the point where you wish to dub a still image, play back the tape. -
Page 56: Dubbing Images Recorded On A Tape To A Memory Card (Gr-Dvl915/Dvl715/Dvl515 Only)
DUBBING (cont.) Dubbing Images Recorded On A Tape To A SNAPSHOT Button Memory Card (GR-DVL915/DVL715/DVL515 only) Images can be dubbed from a tape to a memory card . Load a memory card ( pg. 14) and cassette pg. 12). Select the Snapshot mode in the Menu Screen pg. -
Page 57: Using The Remote Control Unit
USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. Installing The Battery The remote control uses one lithium battery (CR2025). - Page 58 USING THE REMOTE CONTROL UNIT (cont.) & Functions With the camcorder’s Power Switch With the camcorder’s Power Switch Buttons set to the camera position set to “ ”. (“ ” or “ ”) . PAUSE IN Connector — pg. 62 Zoom (T/W) Buttons Zoom in/out ( pg.
-
Page 59: Slow-Motion Playback
Remote sensor Slow-Motion Playback FEATURE: PURPOSE: To allow slow-speed search in either direction during video playback. OPERATION: 1) To change from normal to Slow-Motion Playback, press SLOW (9 or 0) more than approx. 2 seconds. After approx. 1 minute in Slow Rewind or approx. 2 minutes in Slow Forward, normal playback resumes. -
Page 60: Playback Zoom
USING THE REMOTE CONTROL UNIT (cont.) Remote sensor Playback Zoom FEATURE: PURPOSE: To magnify the recorded image up to 50X at any time during playback. OPERATION: 1) Press PLAY (4) to find the scene of interest. 2) Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder's remote sensor. -
Page 61: Random Assemble Editing
NAME (A) (B) Editing. AKAI PHILIPS IMPORTANT Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions. BLAUPUNKT FERGUSON NOTES: ● If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST. - Page 62 ..connect the editing cable to the Remote To AV PAUSE connector. A JVC VCR not equipped with a remote pause To JLIP*** connector but equipped with an R.A. EDIT or EDIT*** connector . . .
- Page 63 SELECT SCENES Programme Point the remote control at the camcorder’s remote MODE Random Assemble – – – – : – – ~ sensor. Press PLAY (4) and then press R.A.EDIT ON/ Editing Menu OFF on the remote control. The Random Assemble Editing Menu appears. If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control.
- Page 64 USING THE REMOTE CONTROL UNIT (cont.) AUTOMATIC EDITING TO VCR Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (6). Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (q6), or manually engage the VCR’s Record-Pause mode.
-
Page 65: For More Accurate Editing
For More Accurate Editing Programme 1 Some VCRs make the transition from Record-Pause to MODE Random Assemble Record mode faster than others. Even if you begin editing – – – – : – – ~ Editing Menu for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. -
Page 66: Audio Dubbing
USING THE REMOTE CONTROL UNIT (cont.) Audio Dubbing Display Audio Dub Standby The audio track can be customized only when recorded in mode the 12-bit mode ( pg. 47). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape. -
Page 67: Insert Editing (Gr-Dvl915/Dvl715/Dvl515 Only)
Insert Editing (GR-DVL915/DVL715/DVL515 only) You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged. NOTES: ● Before performing the following steps, make sure that “TIME CODE”... -
Page 68: System Connections
Connect the camcorder to your PC using the ● When using a DV cable, be sure to use the appropriate cable as shown in the illustration. optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 For GR-DVL915/DVL715/DVL515 Owners:... -
Page 69: Connection To A Video Unit Equipped With A Dv Connector
● Also refer to the instruction manuals of the connected units. ● When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable. To PC connector... - Page 70 REFERENCES REFERENCES CONTENTS DETAILS ..........71 TROUBLESHOOTING ......72 – 76 USER MAINTENANCE ......77 INDEX ........78 – 84 Controls, Connectors And Indicators ..78 – 79 Indications ........80 – 84 CAUTIONS ........85 – 87 TERMS ........88 – 89 SPECIFICATIONS ......
-
Page 71: Details
DETAILS I T E M S N O T E S ➪ ❍ Perform charging where the temperature is between 10°C and Power 35°C. 20°C to 25°C is the ideal temperature range for charging. If pg. 8) the environment is too cold, charging may be incomplete. ❍... -
Page 72: Troubleshooting
TROUBLESHOOTING If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes;... - Page 73 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 9. The colour of Snapshot looks 9. • The light source or the subject 9. • Find a white subject and strange. does not include white. Or compose your shot so that it there are various different also appears in the frame light sources behind the pg.
- Page 74 TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 16. The picture wipe function 16. • The Slow Shutter mode is 16. • Disengage the Slow Shutter does not work. activated. mode or set “WIDE MODE” • “WIDE MODE” is not set to to “OFF”...
- Page 75 LCD monitor become dark. Consult your nearest JVC dealer. 28. The rear of the LCD monitor 28. • The light used to illuminate 28. • Close the LCD monitor to turn is hot.
- Page 76 If the indication remains even though you repeat the above two or three times, please consult your nearest JVC dealer. 42. The charger indicator on the 42. • The temperature of the battery 42. • To protect the battery, it is camcorder does not light.
-
Page 77: User Maintenance
USER MAINTENANCE After Use Cleaning The Camcorder Turn off the camcorder. To clean the exterior, wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it Slide and hold OPEN/EJECT in the direction of well to wipe off heavy dirt. Then wipe again the arrow, then pull the cassette holder cover with a dry cloth. -
Page 78: Index
INDEX Controls, Connectors And Indicators 3 4 5 6 7 &... - Page 79 Controls •J Terminal [JLIP (Joint Level Interface Protocol)] (GR-DVL510/DVL410/ Monitor Open Button DVL310 only) ........pg. 62 [PUSH OPEN] ........pg. 16 Connect to a JLIP-compatible camcorder or VCR to control it from the computer using the Dioptre Adjustment Control ....pg.
-
Page 80: Indications
INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only Appears when in the Squeeze or Cinema mode. pg. 48) Displays the selected Fade/Wipe effect. pg. 40, 41) Rotates while the tape is running. pg. 16) LP 50 Displays the recording mode (SP or LP). pg. - Page 81 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording 40 x PHOTO I GHT Appears when the Power Switch is set to “ ”. Appears when the iris is locked. pg. 44) pg. 17) Appears when Digital Image Stabiliser (“DIS”) is •...
- Page 82 INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback Displays the sound mode. pg. 50, 51) Displays the Blank Search mode. pg. 24) Displays the tape speed. pg. 13) Appears while a tape is running. : Playback 3 : Fast-Forward/Shuttle search 2 : Rewind/Shuttle search : Pause 64 : Forward slow-motion...
- Page 83 ● Appears when the built-in clock battery runs out and the previously set SET DATE/TIME! date/time is erased. Consult your nearest JVC dealer for replacement. Appears for 5 seconds after power is turned on if the lens cap is attached.
- Page 84 Remove the power supply (battery, etc.) and wait a few MODE REMOVE AND minutes for the indication to clear. When it does, you can resume using the REATTACH BATTERY camcorder. If the indication remains, consult your nearest JVC dealer.
-
Page 85: Cautions
It is recommended that you consult your nearest ..do not modify or disassemble. JVC dealer for replacing the video light..do not expose the battery to temperatures exceeding 60°C, as this may cause the battery to overheat, explode or catch fire. - Page 86 CAUTIONS (cont.) Cassettes LCD Monitor To properly use and store your cassettes, be sure to 1. To prevent damage to the LCD monitor, read the following cautions: DO NOT ..push it strongly or apply any shocks. 1.
- Page 87 Serious malfunctioning If, after using the cleaning cassette, the problems still exist, consult your nearest JVC dealer. If malfunctioning occurs, stop using the unit Mechanical moving parts used to move the video immediately and consult your local JVC dealer.
-
Page 88: Terms
TERMS AC Adapter ..........pg. 8, 9 Fade-In/Out ........pg. 40, 41 Analogue Input ........pg. 50, 53 Fast-Forward The Tape ......pg. 21 Audio Dubbing ........pg. 66 Frame-By-Frame Playback ....pg. 21, 59 Auto Date ..........pg. 49 Auto Focus .......... - Page 89 Picture Quality Mode ....... pg. 14 Tally ............pg. 48 Picture Wipe/Dissolve ......pg. 40, 41 Tele Macro ..........pg. 48 Playback Special Effects ......pg. 59 Time Code ......pg. 20, 49, 50, 51 Playback Zoom ........pg. 60 Tripod Mounting ........
-
Page 90: Specifications
: 83 mm x 97 mm x 188 mm (with the LCD monitor closed and the viewfinder pushed down) Weight : Approx. 610 g (GR-DVL915/DVL510) Approx. 600 g (GR-DVL715/DVL410) Approx. 590 g (GR-DVL515/DVL310) Operating temperature : 0°C to 40°C Operating humidity... - Page 91 Approximate number of storable images with memory card [8 MB] (provided) FINE : 100 STANDARD : 200 with memory card [16 MB] (optional) FINE : 200 STANDARD : 400 with memory card [32 MB] (optional) FINE : 400 STANDARD : 800 with memory card [64 MB] (optional) FINE : 800...
- Page 92 VICTOR COMPANY OF JAPAN, LIMITED ®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD. Printed in Japan COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD. 0201HOV...