Dispensing Hot Water - Keurig Vue V1200 Use & Care Manual

SECTION 3
Using Your Brewer with MyBrew
Brewing Over Ice
Prepare Your Cup
Fill a 16 oz. plastic cup with ice. Do not use glass. Remove
the Drip Tray if necessary and place cup under the Brew head.
Choose Vue
Make sure your Vue
features the Brew Over Ice Icon.
Lift the Brewer Handle, insert
the Vue
and lower the Brewer Handle.
Select Size
Coffee Coffee Brew
Café
Not Frothing
& Tea & Tea Over Ice
Ready to Enjoy!
2 Step
After you lower the Brewer Handle, the Brewer will
Brew
H M
OZ
recognize your beverage selection and the Touchscreen
PM
Tea Tea
Menu
Coffee Coffee Froth
Other Other
Size will display as pictured (Iced Coffee example shown).
Step2 Step2 Step1
Regular
Hot Hot
Café
Cocoa Cocoa Select your beverage size using the + and - buttons.
Strong
* Available sizes for Iced Coffee and Iced Tea/Other
are 6 oz., 8 oz. and 10 oz.
* Available sizes for Iced Café are 6 oz. and 8 oz.
Available Sizes*
Press BREW & Enjoy!
Do not remove mug or lift the Brewer Handle until "Enjoy"
disappears from the screen.
Remove the Vue
The Vue
removing. Allow it to cool completely before handling.
14
™
pack
™
pack
™
pack into the Holder
™
pack after brewing is complete.
™
pack will be HOT after brewing. Use caution when
™
What is a Cleansing Brew?
After brewing certain Vue pack varieties such as hot
™
cocoa, iced tea or a café beverage, we recommend
performing a cleansing brew as follows:
Step 1 Take a used Vue pack and peel off the lid. Discard
™
the lid and any filter which adheres to it. Ensure
the empty Vue pack cup is clean.
™
Step 2 Place the EMPTY Vue ™ pack cup in the Brewer and
place a mug on the Drip Tray.
Step 3 Lower the Handle, press the Coffee & Tea button
and press "BREW." The Brewer will dispense 8 oz. of
hot water into your mug. Once complete, discard
the water and carefully remove the Vue
The cleansing is complete.
Stopping the Brewing Process
If you need to stop the brewing process after it has started,
press and release the Power Button to turn the Brewer off.
The beverage flow will stop and the Brewer will shut off.
The Vue ™ pack will be HOT after brewing. Use caution when
removing. Allow it to cool completely before handling.
To turn the Brewer back on, place an empty mug on the
Drip Tray and press the Power Button. Since the previous
brew was interrupted, some water may drip into the mug
during preheating.
We recommend that you perform a cleansing brew before
brewing your next beverage (see above). If this is not done,
the Brewer may deliver an additional amount of water for
your next beverage.

Dispensing Hot Water

If you need hot water for cooking (instant soup or oatmeal,
for example), place a cup or bowl below the Brew Head and
on the center of the Drip Tray. Lift and lower the Handle
WITHOUT inserting a Vue ™ pack. Select "Coffee" (do not
select "Strong") and press "BREW." The Brewer will dispense
hot water into your cup or bowl.
SECTION 3
Using Your Brewer
Step 1
pack cup.
™
Step 2
Step 3
15