Section 2 Preparing Your Brewer; Section 3 Using Your Brewer With Mybrew - Keurig Vue V1200 Use & Care Manual

SECTION 2
Preparing Your Brewer
Step 1
Remove all adhesive tape from Brewer and label from
Touchscreen.
Plug cord into grounded outlet.
If Brewer has been exposed to temperatures below freezing, allow
Brewer at least two hours to reach room temperature before
Step 1
brewing. A frozen or extremely cold Brewer will not operate.
Step 2
Carefully remove Water Reservoir Lid. Remove the Water
Reservoir by lifting up and away from the Brewer.
Rinse Water Reservoir with fresh water. Return Water
Reservoir to Brewer. Fill the Water Reservoir to the
"MAX FILL" line. Bottled or filtered water is recommended.
Place Lid on Water Reservoir.
Step 2
See page 16 for options for how to add water to the
Water Reservoir.
Step 3
Place a 10 oz. mug in the center of the Drip Tray and press
the Power Button.
The Brewer Handle should be in the lowered position.
Step 3
Step 4
When the Brewer is first turned on, the Touchscreen
will indicate "Not Ready" as the Brewer heats the water.
Wait until the Touchscreen indicates "Ready"
(about four minutes).
If there is not enough water in the Water Reservoir,
the Touchscreen will indicate "Add Water" and the Water
Reservoir light will flash.
Step 4
Lift the Brewer handle and remove the shipping disk.
Lower the Brewer Handle, press the Coffee & Tea button,
then press the flashing "BREW" Button. Your Brewer will
dispense 8 oz. of hot water into your mug. Once complete,
discard the hot water. You are ready for your first brew!
8
Using Your Brewer with MyBrew
Brew what you love,
Your new Keurig VUE V1200 Commercial Grade Brewer takes all the guesswork
® ™
out of brewing the perfect beverage. The V1200 features MyBrew
brewer feature is exclusive to the Keurig
sure your beverage is brewed to perfection, the way it was designed, every time.
To activate the MyBrew , make sure you place a Vue™ pack in the Brewer.
™
How to use the Vue Brewer
™
Touchscreen with MyBrew
MyBrew simplifies the brewing experience.
™
Each commercial Vue ™ pack contains an
identification tag that is read by the Keurig
Vue Brewer so it can apply the optimum recipe
™
for your beverage. From there, you can further
customize your brew strength and size using
the Touchscreen. It starts with MyBrew
ends with your perfect brew, every time.
Coffee Brew
& Tea Over Ice
Beverage
Category
Tea
Coffee
Other
Beverage Type Step2 Step2
Regular
Hot
Cocoa
Strong
Strength Selection
(Coffee Only)
The screen above shows all possible menu selections for illustration purposes only.
When in use, your Touchscreen will display only selectable actions.
SECTION 3
the way you love it.
. This premium
™
® Vue ™ Commercial series. MyBrew ™
™
®
™ , and
Activated
Café
Not Brew Status
Ready to
2 Step
Brew
Beverage Size Selection
OZ
Available Sizes
Menu
Froth
Size Coffee
Step1
Tea/Other
Hot Cocoa
Café
™
makes
4 - 18 oz.
6 - 12 oz.
6 - 10 oz.
9