Dispensing Hot Water - Keurig Vue V500 Use & Care Manual

Hide thumbs

Table Of Contents

Table of Contents

SECTION 3

Using Your Brewer

Brewing Over Ice

Prepare Your Cup

Fill a 16 oz. plastic cup with ice. Do not use glass.

Remove the Drip Tray if necessary and place cup

under the Brew Head.

Choose Vue

Make sure your Vue

features the Brew Over Ice Icon.

Lift the Handle, insert the

Vue

pack into the Holder

and lower the Handle.

Select Beverage Type & Size

Select the "Brew Over Ice" button. The Touchscreen

will display as pictured.

Select the desired beverage type.

Select your beverage size using the + and - buttons

at the bottom of the Touchscreen.

* Available sizes for Iced Coffee and Iced Tea/Other

are 6 oz., 8 oz. and 10 oz.

* Available sizes for Iced Café are 6 oz. and 8 oz.

Available Sizes*

Press

Do not remove mug or lift the Handle until "Enjoy!"

appears on the Touchscreen.

Remove the Vue

The Vue

removing. Allow it to cool completely before handling.

Pack

pack

& Enjoy!

pack after brewing is complete.

pack will be HoT after brewing. Use caution when

What is a Cleansing Brew?

After brewing certain Vue

pack varieties such as hot

cocoa, iced tea or a café beverage, we recommend

performing a cleansing brew as follows:

Step 1 Take a used Vue

pack and peel off the lid. Discard

the lid and any filter which adheres to it. Ensure the

empty Vue

pack cup is clean.

Step 2 Place the EMPTY Vue

pack cup in the brewer and

place a mug on the Drip Tray.

Step 3 Lower the Handle, then press "BREW." The brewer

will dispense 8 oz. of hot water into your mug.

Once complete, discard the water and carefully

remove the Vue

pack cup. The cleansing is

complete.

Stopping the Brewing Process

If you need to stop the brewing process after it has started,

press and release the Power Button to turn the brewer off.

The beverage flow will stop and the brewer will shut off.

The Vue

pack will be HoT after brewing. Use caution when

removing. Allow it to cool completely before handling.

When turning the brewer back on, place an empty mug

on the Drip Tray and press the Power Button. Since the

previous brew was interrupted, some water may drip

into the mug during preheating.

We recommend that you perform a cleansing brew before

preparing your next beverage (see above). If this is not

done, the brewer may deliver an additional amount of

water for your next beverage.