Dispensing Hot Water - Keurig Vue Use & Care Manual

What is a Cleansing Brew?
After brewing certain Vue
as hot cocoa, iced tea or a café beverage, we recommend
performing a cleansing brew to clear your Brewer of traces
of the previous beverage. It is an easy 3-step process:
Step 1 Take a used Vue ™
the lid and any filter which adheres to it. Ensure
the empty Vue ™ Cup is clean.
Step 2 Place the EMPTY Vue
place a mug on the Drip Tray.
Step 3 Lower the Handle and press "BREW." The Brewer
will dispense 8 oz. of hot water into your mug
and cleanse the Brewer. Once complete, discard
the water and carefully remove the Vue
The cleansing is complete.
Stopping the Brewing Process
If you need to stop the brewing process after it has started,
press and release the Power Button to turn the Brewer off.
The beverage flow will stop and the Brewer will shut off.
™
The Vue Cup will be HOT after brewing. Use caution when
removing. Allow it to cool completely before handling.
To turn the Brewer back on, place an empty mug on the
Drip Tray and press the Power Button. Since the previous
brew was interrupted, some water may drip into the mug
during preheating.
We recommend that you perform a cleansing brew before
brewing your next beverage (see above). If this is not done,
the Brewer may deliver an additional amount of water for
your next beverage.

Dispensing Hot Water

If you need hot water for cooking (instant soup or oatmeal,
for example), place a cup or bowl below the Brew Head.
Place your cup or bowl as far back as possible. Lift and
lower the Handle WITHOUT inserting a Vue™ Cup. Select
"Coffee" (do not select "Strong") and press "BREW." The
Brewer will dispense hot water into your cup or bowl.
™ Cup portion pack varieties such
Cup and peel off the lid. Discard
™ Cup in the Brewer and
™ Cup.
SECTION 3
Using Your Brewer
Step 1
Step 2
Step 3
15