Network Deployment - Vivotek NR8201 User Manual

Network deployment

Device Connection
1. Connect the supplied power cable from the NR8201/8301 to a power outlet.
2. Press the power button.
3. Connect NR8201/8301 to Network Cameras and computer in LAN via LAN sockets.
Because NR8201/8301 supports PoE, if the Network Camera is PoE-compliant (802.3af), it
allows transmission of power and data via single Ethernet cable.
4. If your want to access NR8201/8301 over the Internet, connect NR8201/8301 to the
Internet via the WAN socket.
5. If you have external devices such as sensors and alarms, make connections from general I/O
terminal block.
2
POWER
1
Network Camera
(PoE)
Network Camera
(without PoE)
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
AC IN 100V-240V
LAN
1: Power
5
2: Relay output COM
3: Relay output N.O.
4: Digital Input 1
5: Digital Input 1 Ground
6: Digital Input 2
7: Digital Input 2 Ground
8: Digital Input 3
9: Digital Input 3 Ground
10: Digital Input 4
11: Digital Input 4 Ground
12: Ground
LAN2 LAN4 LAN6 LAN8
LAN1 LAN3 LAN5 LAN7 WAN
RESET 1 2 3 4 5 6 7 8 9 101112
LAN/
WAN
4
3
5
Cable, DSL
Modem, or router
Internet
User's Manual - 9