System - Vivotek NR8201 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

System

This page allows Administrator to configure the system settings for the Network Video Recorder,
Formed with the following columns; system, system time, E-mail server, FTP server, digital
inputs, digital output and VAST.
System
Host Name: Add a host name for the system identification.
Device Automatic Installation: Check Enable, and the system will automatically detect the plugged-in
camera. Then click Save.
Snapshot and Download Path: The path defines where the system stores the snapshot of both live
monitoring and playback, and the downloaded video from history. It has to be setup before executing the
snapshot and download functions.
System Time
Select one of the following option as the system time displaying in the status panel on top right
of the monitor page. Please refer to page 18 for detailed information.
Keep current date and time: Select this option to reserve the current date and time of the Network Video
Recorder. The Network Video Recorder's internal real-time clock maintains the date and time even when
the power of the system is turned off.
Sync with computer time: Select this option to synchronize the date and time of the Network Video
Recorder with the local computer. The read-only date and time of the PC is displayed as updated.
Manual: The administrator can enter the date and time manually. Note that the date and time format are
[yyyy/mm/dd] and [hh:mm:ss].
Automatic: The Network Time Protocol is a protocol serves synchronize computer clocks by periodically
querying an NTP Server. Assign the IP address or domain name of the time-server.
User's Manual - 39