Network Deployment - Vivotek NR8201 Quick Installation Manual

4

Network Deployment

1. Connect the supplied power cable from the Network Video Recorder (NVR) to a power
outlet.
2. Push the power button to run the NVR.
3. Connect network cameras to the NVR's PoE LAN ports. Connect a management PC to the
WAN port directly or via LAN. The NVR comes with an embedded DHCP server for its LAN
ports. It is necessary to configure the LAN ports and the WAN port into different Class C
subnets, e.g., 192.168.100.xxx for LAN and 192.168.4.xxx for WAN.
4. If you want to access NVR over the Internet, connect the NVR to the Internet via the
WAN port.
5. If you have external devices such as sensors and alarms, make connections from the
general I/O terminal block.
POWER AC IN 100V-240V
2 1
Network Camera
(PoE)
3
NR8301
NR8201
NVR embedded
DHCP server
RESET
Private LAN
3
x8
8-CH PoE
Data Transmitting
Power Supply
4-CH PoE
Data Transmitting
Power Supply
EN - 6
LAN2 LAN4 LAN6 LAN8
LAN1 LAN3 LAN5 LAN7 WAN
1 2 3 4 5 6 7 8 9 101112
Class C
Class C
subnet #1
subnet #0
5
5
4
LAN
Cable, DSL
Modem, or router
Internet
Management
1: Power
2: Relay output COM
3: Relay output N.O.
4: Digital Input 1
5: Digital Input 1 Ground
6: Digital Input 2
7: Digital Input 2 Ground
8: Digital Input 3
9: Digital Input 3 Ground
10: Digital Input 4
11: Digital Input 4 Ground
12: Ground
PC