Maintenance - Vivotek NR8201 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Maintenance

This page allows Administrator to restore the Network Video Recorder to factory default, format
hard disk, and upgrade firmware version, etc.
System
Reboot: This function allows you to restart the Network Video Recorder. It takes 1 ~ 2 minutes to
complete the process. If the connection fails after rebooting, manually enter the IP address of the
Network Video Recorder in the address field to resume the connection.
Restore Default Except Network Settings: This function allows you to restore to the factory default
settings without the network settings. (WAN / LAN / Host name settings).
Restore Factory Default: This function allows you to restore to the factory default settings. Please note
the camera list of device page will no longer exist. The recorded video will still remain and retrievable in
history.
The process window will display when the reboot or restore is in processing.
Download Configuration: Click Download to save the configuration. Please note the configuration of
NR8201 and NR8301 cannot be used for one the other.
Upload Configuration: Click Browse and specify the configuration file in your computer. Then click
Upload to replaced the configuration with the uploaded file.
Firmware
This feature allows you to upgrade the firmware to your Network Video Recorder. Download a new
firmware file from VIVOTEK website. The file is in .upt file format.
In this section, it shows the version and released time of the current firmware for verification. You may
start to load the latest firmware to your computer, and then click Upgrade to start the process. Please
note that do not power off NVR during the process. The NVR will reboot automatically when the upgrade
is complete.
42 - User's Manual