Layout - Vivotek NR8201 User Manual

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Layout

This page allows Administrator to configure the customized layout styles for monitoring. The
settings are composed of the following two columns: Layout Configuration, and Default Layout,
of which allow you to add and edit the layout group by assigning the desired device (camera)
to each viewing cell. Meanwhile, the setting will be synchronized to the monitoring page for a
quick viewing.
Layout Configuration
Select layout: Choose Add new.
Name: Enter a name for the new layout.
Type: Choose a desired type (1x1,2x2,3x3,1+5,1+7) for the display in live viewing window on the
monitoring page. Noted that there are only two types of layout (1x1,2x2) supported in NR8201.
Cells: You can assign a device and select a stream of the assigned device for each cell. Noted that there
are up to 4 cells for NR8201, and up to 9 cells for NR8301.
Save: Click Save to save the new layout.
Remove: Select the layout you want to remove, and click Remove.
Once the layout configuration is done, you may go to the monitor page to confirm the layouts.
Layout type
quick shortcut
for selecting
c u s t o m i z e d
layouts
assign a device
a n d s e l e c t a
stream
Default Layout
Select a layout you've set in Layout Configuration column, and click Save Default to enable the setting.
38 - User's Manual
IP8162P IP8162P
IP8162P
IP8162P
IP8162P
IP8162P