Network Deployment - Vivotek NR8201 Quick Installation Manual

4

Network Deployment

1. Connect the supplied power cable from the Network Video Recorder to a power outlet.
2. Push the power button to run the Network Video Recorder.
3. Connect Network Video Recorder to Network Cameras and computer in LAN via LAN
sockets. If the Network Camera is PoE-compliant, it allows transmission of power and data
via single Ethernet cable. (NR8201 supports 4-CH PoE; NR8301 supports 8-CH PoE)
4. If your want to access over the Internet, connect the Network Video Recorder to the In-
ternet via WAN socket.
5. If you have external devices such as sensors and alarms, make connections from gen-
eral I/O terminal block.
2
POWER AC IN 100V-240V
Network Camera
(PoE)
Network Camera
(without PoE)
3
NR8301
NR8201
1
LAN
8-CH PoE
Data Transmitting
Power Supply
4-CH PoE
Data Transmitting
Power Supply
LAN2 LAN4 LAN6 LAN8
RESET LAN1 LAN3 LAN5 LAN7 WAN
LAN
WAN
LAN
3
EN - 6
1 2 3 4 5 6 7 8 9 101112
4
Cable, DSL
Modem, or router
Internet
5
1: Power
2: Relay output COM
3: Relay output N.O.
4: Digital Input 1
5: Digital Input 1 Ground
6: Digital Input 2
7: Digital Input 2 Ground
8: Digital Input 3
9: Digital Input 3 Ground
10: Digital Input 4
11: Digital Input 4 Ground
12: Ground
5