Guest Network; Basic - TP-Link TD-W8960N User Manual

TD-W8960N
 Associated: Displays whether the wireless station has associated with the access point.
 Authorized: Displays the information of Authentication.
 SSID: Displays the connected wireless station's SSID.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.

4.6 Guest Network

There are two submenus under the Guest Network menu: Basic and Station list. Click any of
them, and you will be able to scan or configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.6.1

Basic

Choose menu "Guest Network""Basic", and you will see the screen as shown in Figure 4-101.
This feature allows you to create a separate network for your guests without allowing them to
access your main network and the computers connected to it.
You can enable or disable Guest Network. When you enable this function, you could set wireless
parameters for Guest Network.
Guest SSID: The guest network name. When setting up a Guest network, it is strongly

recommended to use a name that easily distinguishes it from your primary network.
Authentication Type: Select the Authentication Type from the drop-down list.

Encryption: You can select either Auto, or AES+TKIP.

Wireless Password: Here display the default wireless password, you can click Click here to

display to see the default wireless password, and you can also enter ASCII characters
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-101
80