Ip Tunnel - TP-Link TD-W8960N User Manual

TD-W8960N
2. Enter a unique name for Group.
3. Select the Interface which you want to use from the drop-down list.

Note:
If you like to automatically add LAN clients to a WAN Interface in the new group add the DHCP
vendor ID string. By configuring a DHCP vendor ID string any DHCP client request with the
specified vendor ID (DHCP option 60) will be denied an IP address from the local DHCP server.
4. Select interfaces from the available interface list and add it to the grouped interface list using
the arrow buttons to create the required mapping of the ports.

Note:
These clients may obtain public IP addresses.
5. Click Save/Apply to make the entry effective immediately.

Note:
If a vendor ID is configured for a specific client device, please REBOOT the client device attached
to the modem to allow it to obtain an appropriate IP address.

4.4.15 IP Tunnel

IPv6 tunnel is a kind of transition mechanism to enable IPv6-only hosts to reach IPv4 services and
to allow isolated IPv6 hosts and networks to reach each-other over IPv4-only infrastructure before
IPv6 completely supplants IPv4. It is a temporary solution for networks that do not support native
dual-stack, where both IPv6 and IPv4 run independently.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-62
52