Security - TP-Link TD-W8960N User Manual

TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you
set on this page.

Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
4.4.5.4 ALG
Choose "Advanced Setup""NAT""ALG", and then you can configure the basic security in the
screen as shown in Figure 4-29.
Figure 4-30
Click the Save/Apply button to save your settings.
4.4.6

Security

Choose "Advanced Setup""Security", and you will see the security screen including IP
Filtering and MAC Filtering (only effective in Bridging mode) submenus.
Figure 4-31
4.4.6.1 IP Filtering
The IP address filtering feature makes it possible for administrators to control user's access to the
Internet, which is based on user's IP. The IP address filtering includes Outgoing and Incoming,
the detailed descriptions are provided below.
IP Filtering - Outgoing
Choose "Advanced Setup""Security""IP Filtering", you can configure Outgoing Filtering
rules on the screen (shown in Figure 4-32).
35