Dsl; Upnp - TP-Link TD-W8960N User Manual

TD-W8960N 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
4. Type the User Name and Password for your DDNS account.
Click Save/Apply to save your settings.

4.4.12 DSL

Choose "Advanced Setup""DSL", you can see the DSL Settings screen, this screen allows you
to configure the DSL (shown in Figure 4-59).
Figure 4-59
You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After
you set them up, click Save/Apply to save the configurations.

4.4.13 UPnP

Choose "Advanced Setup""UPnP", you can Enable or Disable the UPnP (Universal Plug and
Play) protocol on the screen.
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
50