Wiring Cover - Mitsubishi Electric FR-D700 Instruction Manual

Removal and reinstallation of the cover
Reinstallation (Example of FR-D740-160)
1) Insert the two fixed hooks on the lower side of the front cover into the sockets of the inverter.
2) Tighten the installation screws on the front cover.
1)
NOTE
Fully make sure that the front cover has been reinstalled securely.
The same serial number is printed on the capacity plate of the front cover and the rating plate of the inverter. Since
these plates have the same serial numbers, always reinstall the removed cover onto the original inverter.
1.3.2

Wiring cover

Removal and reinstallation
FR-D740-012 to 080
FR-D720S-008 to 100
The cover can be removed easily by pulling it downward.
To reinstall, fit the cover to the inverter along the guides.
Example of FR-D740-036
6
Installation screw
Guide
Wiring cover
2)
Fixed hook
Socket of the inverter
FR-D740-120, 160
The cover can be removed easily by pulling it toward you.
To reinstall, fit the cover to the inverter along the guides.
Guide
Example of FR-D740-160
Guide
Wiring cover