Keyboard Functions; Adding Symbols - Brady Handi Quick Start Tutorial

2. Pressing
3. Pressing
4. Pressing
5. Pressing Shift +
of the previous label when entering multiple labels.
6. Pressing Shift +
label when entering multiple labels.
7. Pressing 2nd then
first label when entering multiple labels.
8. Pressing 2nd then moves cursor to the beginning of the last label when
entering multiple labels.
9. Moving the cursor so it is on a character and pressing the Delete Key will delete
the character.
10. To backspace over characters, simultaneously press the Shift & Delete Keys.
11. To insert characters, move the cursor so it is on the character to the right of
what is to be inserted. Insert character(s) by typing them in.
©2003 All Rights Reserved
Keyboard
Functions
Moving Around The Screen
On a clear screen, type in your first
name, then press ENTER, then type your
last name on the second line:
1. Pressing moves cursor one character right.
moves cursor one character left.
▲
moves cursor up to previous line.
moves cursor down to next line.
▲
moves the cursor to the beginning
moves cursor to beginning of the next
▲
moves cursor to the beginning of the
To Create A Label
1. Type: Brady USA.
2. Press: Print/Stop key
(top row of keys, above the yellow "up" cursor key).
tape reverses prior to printing. This is to minimize the amount of unprinted tape
at the start of your label.
3. To remove the label from the printer, pull the cutter lever
toward you.
printer)
To Clear a Label
1. Press: Clear key (below yellow "right" cursor key).
2. Leave cursor on All Labels and press Enter.
3. Press: Enter or the Y key (for YES).

Adding Symbols

Refer to your Symbols Reference Guide for a list of symbols resident in your
HandiMark system.
®
1. Press: Symbol key.
2. Press: Cursor down to the 2nd line to select "Set A."
3. Enter: 42. Press: Enter
(Symbol number 42 from Set A is the "Biohazard" symbol).
4. Press: Print/Stop.
5. Clear all
(press Clear, Enter, Enter).
6
Note that the
(on the left side of the