Intended use
The OpenStage phone was developed as a device for speech transmission
and should be placed on the desk or mounted on the wall. Any other use
is regarded as unauthorized.
Telephone type
The identification details (exact product designation and serial number) of
your telephone can be found on the nameplate on the underside of the
base unit. Specific details concerning your communications platform can
be obtained from your service technician.
Please have this information ready when you contact our service depart-
ment regarding faults or problems with the product.
Speakerphone quality and display legibility
•
To ensure good speakerphone quality, the area in front of the telephone
(front right) should be kept clear.
The optimum handsfree distance is 20 in. (50 cm).
•
Proceed as follows to optimize display legibility:
– Turn the phone to tilt the display. This ensures you have a frontal view
of the display while eliminating light reflexes.
– Adjust the contrast as required
Multi-line telephone, executive/secretary functions
Your OpenStage 40 T is a "multi-line telephone". This means that your ser-
vice personnel can configure multiple lines on your phone, which is not the
case with single-line phones. Each line is assigned an individual phone
number which you can use to make and receive calls.
The programmable sensor keys function as line keys on multi-line phones
page 100.
When using a multi-line phone to make and receive calls, certain particu-
lars must be taken into account
The executive-secretary configuration is a special case. This is a multi-line
telephone with special features (e.g., "Ring Transfer" and "Accept call"),
configured especially for executive/secretary use
Team functions
To increase the efficiency of telephony, your service personnel can confi-
gure various Team functions such as pickup groups, hunt groups, and call
distribution groups.
page 119.
page 101 ff.
page 99 ff.
General information
11