Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 500 Operating Instructions Manual

Basic functions
Step by Step
Forwarding on
1=all calls
2=external calls only
3=internal calls only
Save
Forwarding off
38

Call forwarding

Using variable call forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation. Destinations: fax = 870, DID = 871,
fax DID = 872.
If you are a call forwarding destination, your dis-
play will show the station number or the name of
the originator on the upper line and that of the
caller on the lower line.
Special features must be taken into considerati-
on if your telephone operates with HiPath 5000
(system networking via PC network)
page 113!
r
Press the key shown.
or
c
Open the idle menu
Select and confirm the option shown.
Confirm,
or
select and confirm the option shown,
or
select and confirm the option shown.
j
Enter the destination number.
Confirm.
Deactivating call forwarding
r
Press the key shown.
or
Select and confirm the option shown.
page 22.