Troubleshooting; Caring For Your Telephone - Siemens HiPath 500 Operating Instructions Manual

Hide thumbs Also See for HiPath 500:
Table of Contents

Advertisement

Fixing problems
Step by Step
126

Troubleshooting

Pressed key does not respond
Check if the key is stuck.
Telephone does not ring
Check whether the "Do not disturb" function is activated
on your telephone ("Do not disturb" appears on the
screen
page 21). If so, deactivate it
You cannot dial an external number
Check whether you telephone is locked ("Not authori-
zed" appears on the screen). If the phone is locked, en-
ter your PIN to unlock it
To correct any other problems
First contact the relevant service personnel. If the ser-
vice personnel are unable to correct the problem, they
must contact Customer Service.

Caring for your telephone

Never allow the telephone to come into contact
with coloring, oily or aggressive agents.
Always use a damp or antistatic cloth to clean the
telephone. Never use a dry cloth.
If the telephone is very dirty, clean it with a diluted
neutral cleaner containing surfactants, such as a
dish detergent. Afterwards remove all traces of the
cleaner with a damp cloth (using water only).
Never use aggressive or alcohol-based cleansers on
plastic parts. The use of scouring agents is also for-
bidden.
page 77.
page 81.

Advertisement

Table of Contents
loading

Table of Contents