Change Number (Exchanged Phone/Move/Relocate) - Siemens HiPath 500 Operating Instructions Manual

More functions/services
Step by Step
Relocate
Complete relocate
90
Change number (exchanged phone/
move/relocate)
When configured (consult your service personnel),you
can move your number to any other phone.
Your phone to date is then assigned the old number of
your new phone; the number including phone settings
(e. g. programmed keys) are exchanged.
Prerequisite: Your old and new telephone are the first
telephones at each connection. The telephones are in
idle state.
The following procedure is carried out on the new pho-
ne.
N
Open the Program/Service menu
Select and confirm the option shown.
j
Enter own station number.
j
Enter code (telephone lock)
(Not necessary if you have not set a code.)
Confirm.
If you change numbers of different system pho-
nes, programmed keys are replaced with the de-
fault assignment.
You can however connect your phone to a diffe-
rent port and then carry out the procedure.
page 27.
page 83.